Snapper Tiller Hardware

Fix Number

FIX9081216

Manufacturer Part Number

7010935SM

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

Fix Number

FIX9999890

Manufacturer Part Number

703590

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Fix Number

FIX9999668

Manufacturer Part Number

703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine depending on appliance. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

Fix Number

FIX9999877

Manufacturer Part Number

703579

It is a genuine replacement part that is sourced directly from original equipment manufacturer for use with Snapper and Simplicity lawn mowers. This special hardware is generally used to secure the mower blade to the spindle, please make sure to check appropriate diagrams of your model for correct application of this screw. It is a high-quality metal hex head screw that is sold individually.

Fix Number

FIX16404073

Manufacturer Part Number

703878

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

Fix Number

FIX16404121

Manufacturer Part Number

703986

The pushnut retainer goes next to the ball bearing. This is available as an individual replacement part. This item is an OEM from Snapper, Murray, and Simplicity for use in lawn mowers, lawn tractors, and snowblowers. It might require a wrench to replace this part. It is made of metal and will need to be replaced if it breaks.

Fix Number

FIX8988497

Manufacturer Part Number

5025170

Fix Number

FIX10069516

Manufacturer Part Number

703853

This is an authentic OEM sourced component which is specially made for use with Murray, Snapper, and Simplicity riding lawn mowers and garden tractors. The part provides an identical replacement for a missing or a faulty washer that was installed on a new unit. It provides a tight seal between connected components. Please make sure to refer to the appropriate diagrams for your model for the correct location and application of this part. Keep in mind this high-quality washer is made of durable metal and is sold as an individual item.

Fix Number

FIX9999570

Manufacturer Part Number

703232

This hex nut is created for use on lawn and gardening equipment. This is a multi-application nut that depends on the unit and tool you are using. For installation instructions, check the manual provided by the manufacturer. *Please note: this nut is sold individually.

Fix Number

FIX10000167

Manufacturer Part Number

703893

This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications based on your equipment. Please refer to diagrams for proper use. This item is metal an is sold individually. You would need a wrench to tighten/loosen this nut.