MTD Tiller Parts

MTD Appliance Parts
Shop By Appliance Type

Popular MTD Tiller Parts

In Stock
Lawn Mower Ground Drive Belt
Fix Number FIX9172714
Manufacturer Part Number 954-04032B
This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmission, which propels the wheels on your machine. Pro tip, clean off the pulleys before installing this part for a longer lifespan. We recommend inspecting your belt periodically as they wear out quickly, depending on usage.
In Stock
Washer-Lock 5/16
Fix Number FIX9311087
Manufacturer Part Number 936-0119
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following appliances: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.
In Stock
Hex Bolt 5/16-18 x .75&#34 Lg.
Fix Number FIX10001947
Manufacturer Part Number 710-3008
In Stock
Bell. Wash. .340 I.D. x .872 O.D.
Fix Number FIX10006541
Manufacturer Part Number 736-0242
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex shape of the Belleville washer acts like a spring, which is why they are often used in high load bearing situations.
In Stock
Bearing .62&#34 I.D. x 1.38&#34 O.D. x .437&#34 Thk.
Fix Number FIX9167498
Manufacturer Part Number 941-0155
In Stock
Fix Number FIX9164778
Manufacturer Part Number 931-0374
In Stock
Throttle Box Ass&#39y
Fix Number FIX10017243
Manufacturer Part Number 831-0823A
In Stock
Jamlock Nut, 3/8-16
Fix Number FIX9299545
Manufacturer Part Number 712-0266A
In Stock
Cable Barrel Holder
Fix Number FIX9167431
Manufacturer Part Number 946-0605
Installation Instructions
Ends of control cables are attached with small plastic holder that easily breaks.
Remove small broken plastic cable barrel holder from handle bar mounted control lever with medium standard blade screw driver. Insert control cable barrel into the new replacement holder and re-install to the control lever using existing mounting screw. Order extra cable barrel holders and attach to tiller handle with wire or ty-rap so you have them handy for future use. Easy to replace but tiller is useless without it. Each holder has an "L" or "R" marked on them for reference and must be the same as replaced. Read more...
In Stock
Bell-Wash. .40&#34 I.D. x .88&#34 O.D.
Fix Number FIX10006502
Manufacturer Part Number 736-0105

Appliance Type

Popular MTD Tiller Models