Sweeper Parts

SA FILTER

$3.56

Fix Number: FIX18994473
Manufacturer Part Number: N566707

This is a genuine Black and Decker replacement part, it is sold individually. The 90552433-01 works in conjunction with the 90552388 Prefiter. It will collect the dust and debris that the Prefilter was not able to gather. Its purpose is to catch the dust and small debris from entering the motor and damaging it. Once this filter becomes dirty and clogged it should be discarded, and replaced with a new one.

PRE-FILTER

$2.99

Fix Number: FIX18989567
Manufacturer Part Number: 90640311

This genuine OEM pre-filter in your vacuum is the first line of defense against larger debris and particles, preventing them from clogging the main filter and improving overall filtration efficiency. Positioned inside the dust bowl, you will know it is time for a replacement when the pre-filter appears visibly dirty or clogged, leading to reduced suction power and airflow. To remove the pre-filter, simply press the dust bowl release button on the handle, detach the dust bowl, and take out the filter from within. When installing the new pre-filter, securely attach it to the filter before placing it back into the dust bowl. It is advisable to replace the filter every 6 to 9 months, depending on usage frequency. Keep in mind that the pre-filter and filter are sold separately.

SA VACUUM ATTACHMENT

$9.68

★★★★★

1 Review

Fix Number: FIX18988158
Manufacturer Part Number: 90526071-01

This replacement vacuum adapter is an authentic item that is sourced directly from original equipment manufacturer for use with Black and Decker blower vacuums. It is the adapter that connects to the main unit and the lower tube is connected to it. Please note one durable plastic part is included per order.

FILTER GEN9.5 22 PLEATS NEW

$2.99

Fix Number: FIX18994675
Manufacturer Part Number: N600601

Works with Black & Decker hand held vacuums.

Grass Catching Bag

$11.65

★★★★★

2 Reviews

Fix Number: FIX12664888
Manufacturer Part Number: 90560020-01

This is an authentic shoulder bag for a leaf blower, sold individually. This shoulder bag is black in color and is designed to hold the largest number of leaves possible before disposal. This bag has a shoulder strap included to help evenly distribute weight and a zipper opening to make emptying quick and easy. If the suction has decreased and the bag is not completely full, check that the tube is clear. If the bag has torn or is otherwise damaged, this is a quick and easy replacement. To replace, depress the release button on the power head and pull it straight off. Attach the new collection bag to the power head and your repair is complete.

SAFANANDINSERT

$10.96

★★★★★

4 Reviews

Fix Number: FIX18988948
Manufacturer Part Number: 90593175

Installation Instructions

Justin from WESTMINSTER, CO

OEM plastic/nylon fan/impeller wears out

FIX12004695 fits and works like a charm in BEBL7000. Motor doesn't bog down when big clumps of leaves go in since the increased weight of the impeller acts more like a flywheel and probably will last longer than the original. Read more...

NOZZLE

$2.99

★★★★★

1 Review

Fix Number: FIX18988132
Manufacturer Part Number: 90520039

This authentic OEM replacement part is specifically manufactured for the leaf blowers/vacs/mulchers listed below. This is Black & Decker's standard concentrator tip. It connects to the lower blow tube's end. This tip is designed for quick installation; no special tools are required. Sold individually.

Tube

$4.41

Fix Number: FIX12686237
Manufacturer Part Number: 90519931

This manufacturer approved replacement part is used on Black and Decker backpack blowers. This part interlocks with the other blower tubes that are sold separately. Over time it can crack allowing for air leaks. This will greatly decrease blowing/suction ability of the unit, therefore this part should be replaced. This tube is made out of black plastic and it is sold individually

Installation Instructions

leonard from HINCKLEY, MN

needed new blower tubes and grill

grill - unattach the leaf vac tube by pressing button
first i unattached the leaf vac tube by pushing/pressing indicated button. then i attached grill into place by pushing/pressing indicated button until it snapped into place.

blow tube - since the leaf blow tube was not attached only had to attach the two leaf blow tubes together first, then i attached the combined leaf blow tubes by pushing/pressing the new leaf vac tubes into place unitl it snapped into place.essing button.
- attached Read more...

NOZZLE

$4.77

Fix Number: FIX18988152
Manufacturer Part Number: 90525022

This is a genuine OEM replacement part guaranteed to fit the leaf blowers/vacs/mulchers listed below. This accessory, known to Black & Decker as the Leaf Blaster attachment, features adjustable oscillation. It connects to the lower blow tube's end. No special tools are required for installation. Sold individually.

SAVACUUMATTACHMENT

$10.44

★★★★★

4 Reviews

Fix Number: FIX18988947
Manufacturer Part Number: 90593149

This is an authentic item which is supplied by the original equipment manufacturer for use with Black and Decker blowers. It is an identical replacement for the original component that was included with a new unit. The vacuum adapter allows the blower tube to be connected. No tools would be needed when replacing this part. Simply remove the old part and slot the new one into place. The vacuum adapter is made of durable plastic and is available as an individual part.

Popular Sweeper Parts

Installation Instructions

Installation Instructions

Sweeper Brands

Related Sweeper Parts

Popular Sweeper Models

Sweeper Parts

Start With Your Model Number

Popular Sweeper Parts

Installation Instructions

Installation Instructions

Sweeper Brands

Related Sweeper Parts

Popular Sweeper Models