OEM Wagner Sprayer Parts & Accessories

Separating Oil

$8.29

Fix Number: FIX10505229
Manufacturer Part Number: 0516913A

It is an authentic item that supplied directly from original equipment manufacturer for use with Wagner pumps. Lubrication is a must for any piston pump if you want your equipment to last. It is recommended to squirt some before each use, it is also may be a good idea to squirt a bit in the same spot before storing the unit away. Please note this four Oz. bottle of separating oil is sold individually.

Spring, Outlet

$7.35

Fix Number: FIX18199844
Manufacturer Part Number: 47485

This is a genuine OEM sourced part which is specially designed for use with SprayTECH and Wagner sprayers. It is an identical replacement for a missing or a faulty outlet spring that was installed on a new unit. The part is utilized to apply tension on the ball that sits in the valve seat. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

Suction Tube

$7.81

Fix Number: FIX10505129
Manufacturer Part Number: 0417473

This is an original part from the Wagner manufacturer. The plastic suction tube is made for use with several paint sprayers. This item is secured to the spray gun assembly, sending paint through the device. The suction tube is sold individually. Please refer to specific manual for further repair instructions.

Ring-diaphragm-495

$6.51

Fix Number: FIX18195924
Manufacturer Part Number: 270494

Container Seal

$6.51

Fix Number: FIX17016773
Manufacturer Part Number: 417341

The container seal is a genuine item that is supplied by the original equipment manufacturer for use with Wagner paint sprayers. It fits between the spray gun assembly and the suction tube. The seal is made of a thick Styrofoam and helps to keep the paint from leaking out of the spray gun. This item is sold individually.

Suction Set

$72.89

Fix Number: FIX17016593
Manufacturer Part Number: 516197

This replacement part is supplied by the original manufacturer and is designed for use with sprayers. The purpose of this suction set is to supply the material from the tank to the unit. Over time it may deteriorate and become brittle eventually requiring a replacement. Check the appropriate diagrams and the owner\\\'s manual for your model for the correct application. Note, this high-quality suction set is sold as an individual item.

Nozzle Seal

$6.51

Fix Number: FIX12058253
Manufacturer Part Number: 2359314

This OEM replacement Gasket Seal is designed for certain Wagner Paint Sprayers. It provides a tight air seal between the Spray Gun and the Air Cap. This part is made out of rubber and is sold Individually. It is recommended to replace this part if the tool does not keep pressure or leaks.

Filter Screen, Fine (shown)

$17.81

Fix Number: FIX18212966
Manufacturer Part Number: 89917

This is a genuine manufacturer supplied replacement component. It is specially produced for use with SprayTECH and Wagner sprayers. The filter helps to ensure that the material that goes through the unit is free of dust and other harmful contaminants. It can over time get clogged or damaged eventually requiring a replacement. Keep in mind it is made of high-quality material and is sold as an individual item. Refer to the owner's manual for the correct application and replacement procedure.

Atomizer Valve-yellow (2 Pack)

$15.47

Fix Number: FIX10505247
Manufacturer Part Number: 0525118D

This is a genuine OEM approved replacement part designed for use with Wagner hand-held airless sprayers. It helps to break up the material into a fine spray. To maintain the best performance it is advised to replace the atomizer valve every 3 to 5 gallons. This item is made out of plastic with metal spring and it includes Two (2) valves per order. No tools are needed to replace this atomizer valve.

Suction Tube Assembly-straight

$90.60

Fix Number: FIX10505211
Manufacturer Part Number: 0516198

This genuine manufacturer-sourced part is specially made for use with SprayTECH, Titan and Wagner sprayers. It is an identical replacement for a missing or a faulty suction tube assembly that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable materials and is sold individually. Note, it includes an attached filter that will ensure that the picked up material is free of dust and other harmful contaminants.

Wagner Sprayer Parts

Popular Wagner Sprayer Parts

Wagner Sprayer Appliance Types

Related Wagner Sprayer Parts

Popular Wagner Sprayer Models

Wagner Sprayer Parts

Start With Your Model Number

Popular Wagner Sprayer Parts

Wagner Sprayer Appliance Types

Related Wagner Sprayer Parts

Popular Wagner Sprayer Models