Snow Blower Control Cables

Fix Number

FIX12685355

Manufacturer Part Number

946-04230B

This is a genuine replacement clutch cable sourced from the original equipment manufacturer, designed for use with MTD and Yard Man snowblowers. It serves as an identical replacement for a missing or damaged cable originally installed on new units and plays a vital role in engaging the auger for proper snowblower operation. Made with high-quality rubber insulation, this durable component is sold individually. Please note that the housing, trigger, and hardware are not included and must be purchased separately. For proper installation, refer to your model’s diagram, and be prepared to use tools such as pliers and a wrench set.

Fix Number

FIX10033930

Manufacturer Part Number

946-04229B

Fix Number

FIX9166871

Manufacturer Part Number

946-04396A

It is a genuine OEM sourced replacement speed selector cable which is specially designed for use with MTD and Yard Man snowblowers. The purpose of this cable is to allow a user to adjust the speed of the unit, over time the cable may wear out or break eventually requiring a replacement. It is a high-quality component which consists of a durable rubberized metal cable and it is sold individually.

Fix Number

FIX8845311

Manufacturer Part Number

114-7988

This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the control cable out of the way by securing it in the middle of the handle. This item is priced as a single part.

Fix Number

FIX9170571

Manufacturer Part Number

946-0897

Fix Number

FIX9113736

Manufacturer Part Number

731-04216A

It is a genuine part that is supplied by the original equipment manufacturer for use with snowthrowers. This special dual cable fitting helps to secure the control cables on the handle. It is a high-quality replacement for a damaged or a missing component that was installed on a new unit. One durable plastic fitting is included. To ensure the exact location and the correct application of this part, refer to the appropriate diagrams for your model. It is secured to the handle by a screw which is sold separately. Note, a screwdriver will be needed to perform this repair.

Fix Number

FIX9170572

Manufacturer Part Number

946-0898

This is an authentic OEM sourced replacement part designed for use with snow throwers/blowers. It allows you to engage and disengage the unit. This cable is sold individually. You may need pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable down to the control handle • Attach the other end of the cable • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Fix Number

FIX9311757

Manufacturer Part Number

946-04397A

Fix Number

FIX9167431

Manufacturer Part Number

946-0605

This is a genuine replacement part manufactured for use with tillers and snow throwers. The cable barrel assembly is used to secure the clutch cable to the clutch control handle. This special cable barrel holder is sold individually.

Fix Number

FIX9252097

Manufacturer Part Number

06900502