Snow Blower Brackets and Flanges

Fix Number

FIX11804775

Manufacturer Part Number

131-4138

An uneven deck or poor cut may point to a damaged rear hanger bracket. The bracket gives the deck a firm mounting and pivot point while allowing it to move over the lawn. First check for loose bolts, worn pins, bent lift arms, and cracks near the mounting holes. Match the replacement to the complete mower model and correct side. Set the parking brake, block the wheels, remove the key, and disconnect the spark plug wire. Lower and support the deck before removing the bracket, then tighten all hardware and check belt alignment before use.

Fix Number

FIX16575503

Manufacturer Part Number

597433002

This E-DIP chute rotator bracket is a genuine OEM replacement designed for snow blowers. It supports smooth and controlled rotation of the discharge chute, helping direct snow accurately during operation. Made from durable metal for reliable performance, it’s an ideal replacement when worn or damaged brackets cause stiff movement, binding, or loss of chute control.

Fix Number

FIX9311574

Manufacturer Part Number

941-0225

This is an authentic OEM sourced replacement part that is intended to be used with lawn tractors from MTD and Yard Machines. The hex flange bearing is used to seat the steering shaft into the front frame assembly. This item is available as an individual replacement part.

Fix Number

FIX16416475

Manufacturer Part Number

731-11421

This is a genuine OEM sourced replacement part that is intended to be used with snowthrowers from Ryobi, MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, and Tecumseh. This mounting bracket attaches to the auger housing assembly. The mount is used to secure the chute clean out tool on-board of the snowthrower. This item is sold as an individual replacement part.

Fix Number

FIX8988598

Manufacturer Part Number

50221MA

Bearing-flange

Fix Number

FIX9178252

Manufacturer Part Number

941-0300

Fix Number

FIX11831175

Manufacturer Part Number

1687797YP

This is an original Craftsman replacement part. The idler assembly is designed by the manufacturer for use in snowblowers. This part is made of metal, and is used to hold and move the idler pulley that adjusts the tension on the belt. You will require a wrench when replacing this item. This product is sold individually.

Fix Number

FIX9015839

Manufacturer Part Number

53214200

It is an authentic manufacturer-sourced component which is specially designed for Ariens snowblowers. If the item is damaged or is missing, this will provide an identical replacement. This pinion gear w/bracket is made of high-quality metal and is sold as an individual item. Check the diagrams for your model to ensure the correct replacement procedure. A wrench set will be needed to perform this repair.

Fix Number

FIX10094735

Manufacturer Part Number

26557

Fix Number

FIX11829332

Manufacturer Part Number

593330