Ariens Snow Blower Hardware

Fix Number

FIX9000870

Manufacturer Part Number

52100100

The shear bolt assembly includes one shear bolt and one nut. This shear bolt assembly is OEM guaranteed and designed to exact specification for your equipment. This part has the important job of protecting the snow blower in the event that it hits a hard object, in which case the shear pin will break, and this prevents the auger gearcase from getting damaged. If this happens, it must be replaced before your snowblower is able to operate again. The auger will not turn if the shear pin is broken. Before beginning this repair, make sure the start key has been removed from the engine. Then you will need to remove whatever is left of the damaged shear bolt. Install your new part by first aligning the holes in the rake assembly with the holes in the gear case. Insert the bolt, tap it into place and then secure it with the nut.

Fix Number

FIX9002923

Manufacturer Part Number

51001500

This part includes one shear pin and one center lock nut. If the snowblower augur comes in contact with something hard, the shear pin is designed to break, stopping the transmission and engine from getting damaged. Once this pin is broken, the auger will not turn. These parts are OEM quality parts.

Fix Number

FIX16233864

Manufacturer Part Number

06500904

This is a genuine OEM sourced replacement part designed for use with Ariens snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to tighten/loosen this nut.

Fix Number

FIX8799352

Manufacturer Part Number

06200209

This is a carriage bolt designed for Ariens snow blowers/throwers and it is sold individually. It is an authentic OEM sourced replacement part generally used to attach scraper blade. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened. Please note the lock nut is sold separately. When replacing this bolt you would need a wrench to remove or secure the nut.

Fix Number

FIX12614397

Manufacturer Part Number

07400122

This manufacturer-sourced replacement screw is designed for use with Ariens snow blowers and throwers. As a standard hardware component, it has multiple potential applications depending on the model. Made of durable metal, this part is sold individually. A wrench is required to tighten or loosen the screw during installation or removal. For proper use and placement, please refer to your equipment’s diagrams.

Fix Number

FIX8797821

Manufacturer Part Number

05803700

This is a genuine Ariens replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal roll pin is used to secure a portion of the auger rotor assembly. This item is sold as an individual replacement part, please note two may be needed.

Fix Number

FIX12612898

Manufacturer Part Number

06200333

This is a genuine manufacturer-approved carriage bolt, designed as a standard replacement part that fits a variety of products. It features a square section beneath the head, which fits into a matching square hole in the workpiece. This design prevents the bolt from turning while the nut is being tightened, ensuring a secure and stable fit. Please note that this item is sold individually and does not include the nut.

Fix Number

FIX8800978

Manufacturer Part Number

06714500

It is a genuine OEM sourced replacement part, it is specially designed for use with Ariens snowblowers. This spring clip pin has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. Note this durable metal item is sold individually.

Fix Number

FIX8801091

Manufacturer Part Number

07009000

This is an authentic Ariens replacement part manufactured for use with snowthrowers. The retainer nut is used to secure various part assembly which depends on the model of snowthrower. This retainer nut us sold as an individual replacement part, please see model diagram for part location and usage.

Fix Number

FIX9999462

Manufacturer Part Number

703059

It is an authentic manufacturer-approved replacement part which is produced for use with Murray, Snapper and Briggs and Stratton lawn and garden equipment. This special bolt is utilized to secure the upper and lower handles of the push lawn mower, please note the bolts and other components are all sold separately. It is a high-quality hardware which is sold individually.