Echo Pole Saw Hardware

Fix Number

FIX8859978

Manufacturer Part Number

13211546730

This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.

Fix Number

FIX8917824

Manufacturer Part Number

21041752730

Genuine OEM replacement part,this item is sold individually. The purpose of the Wing Bolt is to secure the Air Filter Cover and Air Filter to the Air Cleaner Case on all of the Outdoor Products shown below.

Fix Number

FIX10053748

Manufacturer Part Number

V490001230

This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.

Fix Number

FIX9261895

Manufacturer Part Number

13201309820

This is a genuine OEM replacement part, it is sold individually. Made of metal. Its purpose is to secure the fuel line to the fuel filter. It is commonly used with outdoor lawn equipment, and is compatible with the model numbers shown below.

Fix Number

FIX9246230

Manufacturer Part Number

V299000250

This genuine OEM thumb screw is supplied by original equipment manufacturer for use with Echo backpack blowers. It is designed to secure the air cleaner cover. This is a metal screw with a plastic top. No tools needed to install or remove this screw.

Fix Number

FIX9148697

Manufacturer Part Number

90050000005

This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.

Fix Number

FIX9279274

Manufacturer Part Number

43301903933

This is an authentic OEM replacement flange nut, sold as an individual part. It is compatible with various types of equipment and is used to secure components, such as a guide bar cover, sprocket guard, etc. The size of this flange nut is No.6.

Fix Number

FIX9323037

Manufacturer Part Number

V804000060

It is an authentic OEM sourced item that is specially produced for use with Shindaiwa and Echo handheld lawn and garden equipment. This screw is generally used to secure the housing, please make sure to check appropriate diagrams for correct location and use of this hardware. One torx screw is included per order.

Fix Number

FIX9153138

Manufacturer Part Number

90023805016

This is a genuine OEM sourced replacement part designed for use with Echo blowers/trimmers. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To remove or install this screw you would need a screwdriver.

Fix Number

FIX8898119

Manufacturer Part Number

17501439131

This clutch washer, also known as a circular washer, cushions and absorbs shocks and prevents direct contact between the clutch drum and the engine. Typically located in the clutch assembly of your equipment, the washer measures 10.2 millimeters in inner diameter, 24.5 millimeters in outer diameter, and 1.2 millimeters in thickness. Over time, it can wear out or become damaged due to regular use, insufficient lubrication, or exposure to excessive heat. If you notice signs like warping, cracking, or significant wear on the outer or inner surfaces, it is crucial to replace the clutch washer. Failing to do so can result in reduced power transmission between the engine and cutting blades, leading to diminished performance and potential costly repairs. To replace it, start by removing the chain cover and bar, then loosen and remove the clutch assembly. Carefully replace the old clutch washer with the new one, and reassemble your equipment in reverse order. Please keep in mind that this replacement part is sourced directly from its original equipment manufacturer and is sold individually.