Simplicity Leaf Blower / Vacuum Hardware

Fix Number

FIX16431884

Manufacturer Part Number

771009

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.

Fix Number

FIX9999890

Manufacturer Part Number

703590

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Fix Number

FIX9999668

Manufacturer Part Number

703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

Fix Number

FIX16404073

Manufacturer Part Number

703878

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

Fix Number

FIX8988497

Manufacturer Part Number

5025170

Fix Number

FIX9961948

Manufacturer Part Number

5025394SM

This is a genuine manufacturer-sourced part which is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality nut is made of durable metal and is sold individually.

Fix Number

FIX9999570

Manufacturer Part Number

703232

This hex nut is created for use on lawn and gardening equipment. This is a multi-application nut that depends on the unit and tool you are using. For installation instructions, check the manual provided by the manufacturer. *Please note: this nut is sold individually.

Fix Number

FIX10000167

Manufacturer Part Number

703893

This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications based on your equipment. Please refer to diagrams for proper use. This item is metal an is sold individually. You would need a wrench to tighten/loosen this nut.

Fix Number

FIX9999581

Manufacturer Part Number

703251

This is an authentic OEM sourced replacement component which is specially made for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality hex nut is made of durable metal and is sold individually.

Fix Number

FIX10069523

Manufacturer Part Number

704146

This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in snowthrowers and lawn tractors from Murray, Simplicity, and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this part. This item is available as an individual replacement part.