Leaf Blower / Vacuum Pumps

Fix Number

FIX8858167

Manufacturer Part Number

12318140630

This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the engine of your machine a faster start by pulling fuel into the carburetor. If your pump is malfunctioning your machine will not receive the fuel it needs to operate properly. If you notice the primer pump is leaking you must replace it, as it could become dangerous.

Fix Number

FIX10140729

Manufacturer Part Number

168398-2

This is a genuine OEM replacement part designed for use with Makita power tools. It is made out of rubber and it is sold individually. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced.

Fix Number

FIX9364946

Manufacturer Part Number

505306701

This is an authentic replacement part manufactured for use with Husqvarna outdoor power equipment. The pump connects to the carburetor and is used to circulate fuel through the carburetor when cold starting the motor. This pump is available as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX16429077

Manufacturer Part Number

753-08491

Fix Number

FIX11804598

Manufacturer Part Number

125-0494

This is a black plastic impeller for blowers and vacuums. Please note that the hardware to secure the impeller is sold separately. This genuine OEM part is designed to replace the original. The impeller (or fan) is fastened in the blower housing and attaches to the crankshaft of the engine. When the impeller rotates it creates airflow. Sometimes rocks or other debris can get sucked up into the fins, which can cause damage. When the fins get damaged, this can cause the impeller to fail, resulting in the inability to blow air.

Fix Number

FIX9120356

Manufacturer Part Number

753-05929

Fix Number

FIX16271978

Manufacturer Part Number

127-7092

Fix Number

FIX17087880

Manufacturer Part Number

586607203

This steel snowblower impeller is a key internal component that helps efficiently discharge snow through the chute by spinning at high speed behind the augers. Built from heavy-duty, corrosion-resistant steel, it is designed to handle wet, heavy snow and maintain reliable performance in demanding winter conditions. By restoring proper snow movement and throwing distance, it helps keep your equipment operating effectively and is a durable replacement solution for worn or damaged impellers.

Fix Number

FIX9150201

Manufacturer Part Number

791-182550

This is a genuine replacement part manufactured for use with leaf blowers. The special impeller is driven by the motor and the fan blades make the wind that blows out of the blower tubes. This impeller is available as an individual replacement part.

Fix Number

FIX12620937

Manufacturer Part Number

580780901

Keep your handheld gas-powered blower running smoothly with this genuine manufacturer-approved replacement flywheel. Designed to fit securely inside the blower housing, this part connects directly to the engine’s crankshaft to help maintain proper engine function and performance. Made from durable plastic with a metal bushing at the center for added strength and stability, this flywheel is built to withstand regular use. Whether you're replacing a worn-out part or doing preventative maintenance, this component helps ensure your blower starts easily and runs reliably.