Leaf Blower / Vacuum Filters

Fix Number

FIX9285148

Manufacturer Part Number

530095646

This fuel filter is for lawn and garden equipment engines. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel tank and disconnect the spark plug wire before beginning the repair.

Fix Number

FIX11826311

Manufacturer Part Number

A369000480

This is a single OEM fuel filter that has been approved by the manufacturer, ensuring the highest quality. It is compatible with numerous types of outdoor power equipment, such as blowers, trimmers, edgers, chainsaws, etc. This is a very important maintenance part that should be replaced on a regular schedule. Its purpose is to remove contaminants that could clog up the carburetor, which should also be regularly inspected. For this simple repair, slide the new fuel filter onto the fuel line and use a screwdriver to place the clamp tightly over the nipple.

Fix Number

FIX9195232

Manufacturer Part Number

A226001410

This part is the replacement air filter for your small engine, used for outdoor power equipment. It has a black plastic rim that is approximately 2.5 inches by 2.5 inches. The air filter in your small engine prevents dirt and debris from entering the cylinder, where it can cause more serious damage. If your air filter is clogged, it can decrease your engine performance, and it will need to be cleaned or replaced. If the filter is damaged, it will need to be replaced as well. This is an OEM part sourced directly from the manufacturer, and is it sold individually.

Fix Number

FIX12661913

Manufacturer Part Number

591375401

Located inside the fuel tank, the fuel filter removes debris before it can reach the carburetor. If your small engine starts with difficulty or idles rough, it may be clogged, restricting the flow of fuel to the carburetor. Replacing the fuel filter is a maintenance task that should be performed regularly to ensure your engine continues to run efficiently. This manufacturer-approved part is sold individually.

Fix Number

FIX11826309

Manufacturer Part Number

A369000460

This is an OEM fuel filter and is sold individually. This repair is very easy and will only take a few minutes. It is also a very important maintenance task that should be done regularly. This part is located inside the fuel tank and filters out debris to prevent it from making its way to the carburetor. If you notice fuel is leaking or their seems to be blockage, your fuel filter is likely in need of a replacement.

Fix Number

FIX16575511

Manufacturer Part Number

597797901

Fix Number

FIX9313970

Manufacturer Part Number

A226000032

The job of the air filter is to prevent dirt and debris from making its way to the engine and clogging the carburetor or causing damage to the cylinder piston. There is one air filter included in this package, however, if your equipment gets a lot of use, it might be wise to have an extra on hand. If the filter is not regularly replaced and inspected according to your equipment maintenance schedule, it will get clogged and this can lead to poor engine performance and more serious repairs. Changing the air filter is very simple. Start by removing the air filter cover, pull the old air filter out by hand, and place the new one onto the base, making sure it seals all the way around.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX10254136

Manufacturer Part Number

90558115

This is an OEM pre-filter assembly for a handheld vacuum, sold individually. Your vacuum may have a second filter (filter bag) and this is sold separately. This filter can be washed with warm and soapy water, however if it has been six to nine months or it is damaged, it will need to be replaced. To replace this filter, slide the outer plastic filter over the cloth filter. Line-up the wings of the plastic filter with the openings of the cloth filter and turn it counterclockwise. Put the filters back into the bowl, pushing them until they are locked in place.

Fix Number

FIX12505327

Manufacturer Part Number

90558113-01

This product includes one re-usable manufacturer-approved cloth filter. Even though the filter is re-usable, the manufacturer recommends replacing it every six to nine months depending on how often the vacuum is used. You may want to consider having a few extra on-hand. The filter is located inside the dust bowl and can be accessed by pressing the release button and pulling the bowl straight off. You can then pull out the filter from the bowl. The new filter can be placed into the bowl by pressing it firmly until it is secured in place. To keep the filter well-maintained, it can be washed gently with warm soapy water, being sure to let it fully dry before placing it back into the vacuum.

Fix Number

FIX12088681

Manufacturer Part Number

A226000473

This is an OEM single layer air filter for power pruners and blowers. This filter is made up of mesh material and is encased in a plastic frame. It removes any dust and debris, which protects the engine from harmful buildup. If the air filter is left unattended to, this could lead to more serious engine damage or a clogged carburetor, causing a poor-running tool. It is important to inspect this filter often and replace it at least once a year, depending on use. For this quick and easy repair, remove the air cleaner cover, pull the old filter out, and place the new filter on the base with the flange facing out. Make sure it has formed a solid seal around the base and place the lid back on.