Official Cub Cadet Leaf Blower / Vacuum Hardware

Pin-bow Tie Cotter

$6.51

Fix Number: FIX9096195
Manufacturer Part Number: 714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Fixes these symptoms

Auger will not turn
See more...

Nut-flglk 5/16-18

$6.51

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Lawn Mower Flanged Lock Nut

$6.51

Fix Number: FIX9095080
Manufacturer Part Number: 712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Lawn Mower Hex Washer Head Screw

$6.51

Fix Number: FIX9298768
Manufacturer Part Number: 710-0599

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches long, and has 20 threads per inch. This style is a hex head with a built-in washer that will cut its own threads in most predrilled steel.

Carriage Bolt 5/16-18 x 3/4" Lg.

$6.51

Fix Number: FIX9298671
Manufacturer Part Number: 710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Nut-flglk

$6.51

Fix Number: FIX9299574
Manufacturer Part Number: 712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Lawn Mower Flange Lock Nut

$6.55

Fix Number: FIX9299591
Manufacturer Part Number: 712-04217

It is an authentic OEM sourced item which is specially produced for use with lawn mowers made by MTD, Bolens, Yard Man, Yard Machines, Troy-Bilt, and Cub Cadet. The flange lock nut attaches to the rear wheel. It may require a socket set during installation and will need to be replaced if it becomes broken. This item is priced individually and is made out of metal.

Washer-lock 5/16

$6.55

Fix Number: FIX9311087
Manufacturer Part Number: 936-0119

If the shafts in the drive belt pulley assembly spin freely when they should remain locked together, this lock washer may need replacement. The silver metal washer maintains tension on the pulley shaft nut to help keep it secure, it measures 5/16 inches inside and 0.5 inches outside. Sold individually, you should confirm compatibility with your equipment before purchasing this washer.

Fuel Tank Grommet

$6.55

Fix Number: FIX9156129
Manufacturer Part Number: 92071-2142

This is a genuine replacement part sourced directly from original manufacturer. It is designed for use with Kawasaki handheld equipment. This grommet fits in the fuel tank and it helps to secure hose. It is made out of rubber and it is sold individually. No tools are needed to replace.

Washer-flat

$6.55

Fix Number: FIX9119143
Manufacturer Part Number: 736-3084

This is a genuine replacement part manufactured for use with outdoor power equipment. The flat metal washer has many applications, usually use to fasten other parts. The washer is sold individually, please see model diagram for part location, and usage.

Cub Cadet Leaf Blower / Vacuum Hardware

Popular Cub Cadet Leaf Blower / Vacuum Hardware

Related Cub Cadet Leaf Blower / Vacuum Parts

Cub Cadet Leaf Blower / Vacuum Hardware

Start With Your Model Number

Popular Cub Cadet Leaf Blower / Vacuum Hardware

Related Cub Cadet Leaf Blower / Vacuum Parts