Official Simplicity Lawn Tractor Hardware

Snow Blower Shear Pin

$6.25

Fix Number: FIX9999468
Manufacturer Part Number: 703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Lawn Mower Spindle Blade Washer

$12.28

Fix Number: FIX9266914
Manufacturer Part Number: 1731917SM

This item is sourced from the original manufacturer and is intended to be used with riding lawnmowers from Murray, Snapper, and Simplicity. The metal washer is used to provide spacing between the top of the blade and the spindle assembly. This item will require a hex wrench or ratchet to install and is priced as a single item.

Nut, Push

$6.25

Fix Number: FIX16431884
Manufacturer Part Number: 771009

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.

Lawn Mower Nut

$8.00

Fix Number: FIX9999668
Manufacturer Part Number: 703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

Lawn Mower Hex Head Washer Screw

$6.92

Fix Number: FIX8943581
Manufacturer Part Number: 2828635SM

This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.

WASHER, Hex, 11/16 x 2

$7.30

Fix Number: FIX8888820
Manufacturer Part Number: 1713089SM

This replacement hex washer is an authentic component which is supplied directly from the original equipment manufacturer, it is specially designed for use with Snapper and Simplicity lawn mowers. It helps to distribute the pressure evenly between connected pieces, please refer to the appropriate diagrams of your model for the correct location and use of this hardware. This high-quality part is made of durable metal material and is sold individually.

Pin, 3/32 X 1.6

$6.25

Fix Number: FIX9999596
Manufacturer Part Number: 703300

This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the pin, refer to the diagrams provided with your equipment. It is made of metal, and can be used in various locations in the machine. You will need pliers to install this part.

Bolt-wheel 3/8-16x2.7

$8.48

Fix Number: FIX8915711
Manufacturer Part Number: 2108765SM

This genuine OEM replacement part is sourced directly from original manufacturer for use with lawn mower and garden tractors. This bolt helps to secure the deck wheel which supports mower deck and allows it to move freely. This hex head bolt is sold individually and would require a wrench for installation.

Lawn Mower Flat Washer

$6.25

Fix Number: FIX9999890
Manufacturer Part Number: 703590

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Nut, 3/8-16 Hex Nyloc

$6.25

Fix Number: FIX9961948
Manufacturer Part Number: 5025394SM

This is a genuine manufacturer-sourced part which is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality nut is made of durable metal and is sold individually.

Simplicity Lawn Tractor Hardware

Popular Simplicity Lawn Tractor Hardware

Related Simplicity Lawn Tractor Parts

Simplicity Lawn Tractor Hardware

Start With Your Model Number

Popular Simplicity Lawn Tractor Hardware

Related Simplicity Lawn Tractor Parts