Lawn Tractor Control Cables

★★★★★

★★★★★

1 Review

Fix Number

FIX11813377

Manufacturer Part Number

946-05124A

This is an authentic OEM part. The MTD deck engage cable is composed of metal and plastic parts, and has been designed for use in several tractor machines. This part is fastened onto the frame assembly. The deck engage cable works to move belt idler pulley and engage the cutting blades. Please refer to manual for specific repair instructions. A wrench and a screwdriver is helpful in making the replacement. This part is sold individually.

Fix Number

FIX9015022

Manufacturer Part Number

532183567

This is a lawn mower engine control cable, also sometimes referred to as a zone control cable. This part is sourced directly from the manufacturer and is sold individually. It is comprised of a metal wire with Z-type bent ends, a rubberized exterior, and a plastic clip. This part is designed to stop the engine when you release the handle. The conduit measures approximately 52.5 inches and the cable measures roughly 61.5 inches.

Fix Number

FIX9018907

Manufacturer Part Number

532427497

This is a genuine Craftsman part for use with Lawn Mowers. The zone control cable stops the engine when you let go of the handle. This part is sold individually. The most common reason for replacing the control cable is if it is broken, causing the brake to not release even when the lever is pressed. The tool that you will need to replace the zone control cable is pliers.

Fix Number

FIX9019323

Manufacturer Part Number

532435111

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered and Poulan. This part attaches the lever to the idler arm on the mower deck and grants you access to disengage and engage the blades. This manual clutch cable includes the cable, cable sheath with connection clips and the spring hook. You will need a socket set to replace this part. This part is made of metal, rubber and wire.

Fix Number

FIX10033928

Manufacturer Part Number

946-04173E

This is an OEM deck engagement cable, sold as one part. This part is for a lawnmower and its purpose is to engage the mowers blade, allowing you to control your engine zone. It consists of a metal wire cable, a rubber cover and an extension spring on one end and a Z-bend on the other. The cable casing length is approximately 39-inches and the inner wire length is about 56-inches.

Fix Number

FIX9019379

Manufacturer Part Number

532435110

Authentic replacement part used on Husqvarna riding lawn mowers/tractors. This cable consists of a metal wire cable with z-type bent end and rubberized cover/body. The clutch cable engages the deck. You may need pliers to complete this repair. • First you want to see where the old cable is attached • Just remove the cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Fix Number

FIX12662045

Manufacturer Part Number

584243501

Deck Clutch Cable

Fix Number

FIX9013361

Manufacturer Part Number

532175067

This is an authentic manufacturer sourced replacement part used on lawn mowers/tractors. It connects the mower engagement lever to the idler arm on the mower deck and allows you to engage and disengage the blades. Includes bold and the zip tie. You may need Pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable down to the control handle • Attach the other end of the cable • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Fix Number

FIX9014267

Manufacturer Part Number

532183281

This is a genuine item is supplied by the original equipment manufacturer for use with Poulan rotary lawn mowers. It is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owner's manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rubberized engine zone control cable is sold individually.

Fix Number

FIX9973566

Manufacturer Part Number

532408047

This is an authentic Husqvarna replacement part manufactured for use with walk-behind lawnmowers. The cable is used to link the bail and the engine and is used to keep the mower running while the bail is pressed to the handle and stops the engine when the bail is released. This cable is sold as an individual replacement part.