Lawn Tractor Blades

★★★★★

★★★★★

1 Review

Fix Number

FIX9017804

Manufacturer Part Number

532405380

This is a manufacturer-approved high quality replacement blade for a lawn tractor and is sold individually. It is used on 46-inch decks, and measures approximately 22-1/2 inches long and 2-3/4 inches wide. This blade is a high-lift blade (2-in-1 blade), meaning it is designed with curved tips that lift grass clippings up and out through the discharge chute into a grass bag (if applicable). By replacing a dull, bent, or damaged blade, this will ensure a better quality cut. For this repair, you will need a wrench to remove the blade bolt, and we recommend wearing gloves to protect your hands.

★★★★★

★★★★★

1 Review

Fix Number

FIX9286056

Manufacturer Part Number

532138971

This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX9169783

Manufacturer Part Number

942-0741A

This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces along the edges of the blade. If installed correctly this part will keep the grass clipping under the deck longer, and re-cut them. The blade is 21 inches long, and sold individually.

Fix Number

FIX9015048

Manufacturer Part Number

532180054

This is an OEM replacement part, sold individually. The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging the grass clippings. If you want to Mulch your clippings you would want to purchase a Mulching Blade. This part is compatible with the mowers and tractors listed below. A wrench is needed for replacement. This blade is used on mowers with 48

Fix Number

FIX9287337

Manufacturer Part Number

532422719

This genuine replacement part is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is a 3 in 1 blade which can be used to mow, mulch or discharge grass. Damaged mower blades can cause excessive vibration in the mower, while dull mower blades usually get noticed by the ugly, irregular patterns they make in the lawn. This blade is made of high-quality metal and it is sold individually.

Fix Number

FIX9010540

Manufacturer Part Number

532134149

This is mulching blade is specially designed for use with Craftsman riding lawn mowers/tractors. Mulching blades are shaped to keep the grass under deck for longer allowing it to be cut into smaller pieces. This provides natural mulch for your lawn since smaller clippings will decompose quicker, releasing their nutrients into the soil. It is made out of metal and it is sold individually. To install this mulch blade you would need a socket wrench. • Park the riding lawnmower on a flat surface such as a garage floor or a driveway • Disengage blades by pulling the cutting deck lever fully to the disengaged position • Set the riding lawnmower cutting deck to the highest position to access blades • Unscrew the blade bolt • Remove old blade and secure a new one in place • Reassemble in reverse order and test your new blade

Fix Number

FIX9023665

Manufacturer Part Number

532421825

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Husqvarna walk behind lawn mowers. The blade allows you to cut grass and weeds safely. This part is made of steel and is sold individually. The tools needed for installation are a screwdriver, a torque wrench, and a socket wrench. Before beginning the repair, please remove the spark plug boot to avoid premature starting and engage the parking brake.

Fix Number

FIX9982357

Manufacturer Part Number

581473301

This Genuine OEM blade adapter is a manufacturer-sourced replacement part designed for use with select Craftsman lawn mowers. Made from durable metal and sold individually, this component serves as a direct replacement for a missing or faulty adapter, allowing the user to securely attach the mower blade to the engine shaft. A properly functioning blade adapter is essential for safe and efficient cutting performance. To ensure correct fit and application, please refer to your model’s parts diagram or owner’s manual before ordering. Replacing a worn or damaged adapter helps maintain blade stability and overall mower reliability.

★★★★★

★★★★★

1 Review

Fix Number

FIX9982439

Manufacturer Part Number

581851501

This genuine, manufacturer-approved replacement part is designed for use with Husqvarna lawn mowers. The blade adapter serves as a crucial connector, allowing the mower blade to attach securely to the spindle. Constructed from durable metal, this part ensures a reliable fit and long-lasting performance. It is sold individually, and replacing it typically requires a wrench for proper installation.

Fix Number

FIX16374807

Manufacturer Part Number

586859604