Snapper Lawn Tractor Accessories Hardware

Fix Number

FIX16431884

Manufacturer Part Number

771009

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.

Fix Number

FIX8888820

Manufacturer Part Number

1713089SM

This replacement hex washer is an authentic component which is supplied directly from the original equipment manufacturer, it is specially designed for use with Snapper and Simplicity lawn mowers. It helps to distribute the pressure evenly between connected pieces, please refer to the appropriate diagrams of your model for the correct location and use of this hardware. This high-quality part is made of durable metal material and is sold individually.

Fix Number

FIX9266914

Manufacturer Part Number

1731917SM

This item is sourced from the original manufacturer and is intended to be used with riding lawnmowers from Murray, Snapper, and Simplicity. The metal washer is used to provide spacing between the top of the blade and the spindle assembly. This item will require a hex wrench or ratchet to install and is priced as a single item.

Fix Number

FIX9265686

Manufacturer Part Number

1715724SM

This is a genuine OEM sourced replacement spacer that is specially produced for use with Snapper and Simplicity lawn and garden equipment. This spacer is used in the mower deck assembly for the mandrel assembly, please make sure to check appropriate diagrams of your model for correct location and use of this hardware. It is a high-quality component which is made of durable metal and it is sold individually.

Fix Number

FIX8891426

Manufacturer Part Number

1732544SM

This is an authentic replacement part manufactured for use with riding lawnmowers. The metal spacer is found on the top side of the deck and used to provide space between the bearings on the spindle so the pulley is held at the correct height. This spacer is sold as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX9999468

Manufacturer Part Number

703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Fix Number

FIX8915711

Manufacturer Part Number

2108765SM

This genuine OEM replacement part is sourced directly from original manufacturer for use with lawn mower and garden tractors. This bolt helps to secure the deck wheel which supports mower deck and allows it to move freely. This hex head bolt is sold individually and would require a wrench for installation.

Fix Number

FIX9999596

Manufacturer Part Number

703300

This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the pin, refer to the diagrams provided with your equipment. It is made of metal, and can be used in various locations in the machine. You will need pliers to install this part.

Fix Number

FIX12605685

Manufacturer Part Number

2171600SM

An authentic item that is supplied by the original manufacturer for use with Snapper, Murray and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hood strap that was originally installed on a new unit, please make sure to chuck the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable black rubber material and is sold individually.

Fix Number

FIX9081216

Manufacturer Part Number

7010935SM

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.