Lawn Mower Ignitions

Fix Number

FIX9286098

Manufacturer Part Number

532140401

This is a genuine replacement part sourced directly from manufacturer. It is designed for use with riding lawn mowers/tractors. The ignition key is inserted into the switch to start the mower. This is a safety feature for unauthorized use of the mower. This part is made out of plastic with metal and it is sold individually.

Fix Number

FIX9051002

Manufacturer Part Number

63-8360

This replacement ignition key is sourced directly from original equipment manufacturer. It is specially designed for Toro snow blowers/throwers. This is a safety feature to prevent any unauthorized use of the mower. The key is inserted into the ignition switch allowing the user to start the unit. This key is made out of metal with a plastic grip. It is sold individually.

Fix Number

FIX12629130

Manufacturer Part Number

532140403

This is a genuine replacement part which is sourced directly from the original equipment manufacturer for use with Craftsman riding lawn mowers. The ignition key is inserted into the switch to start the mower, it is a safety feature to prevent unauthorized use of the mower. This part is made of high-quality plastic with metal and it is sold individually.

Fix Number

FIX9045176

Manufacturer Part Number

591459

Hard starting or an engine that suddenly stops may point to a damaged magneto armature. This ignition coil turns magnetic energy from the spinning flywheel into the electrical pulse that fires the spark plug. First try a known-good spark plug and inspect the safety switches, grounding wire, terminals, and flywheel magnet. Confirm fit from the full engine identification numbers, since similar coils may mount differently. Work only with the engine off and cool. Disconnect the battery and spark plug lead before removing covers. During installation, use the air gap listed in the service manual and tighten the mounting screws evenly. Keep hands clear of the flywheel and use an insulated tester to check for spark.

Fix Number

FIX9278124

Manufacturer Part Number

397358

This magneto provides the spark your engine needs to start and run properly. It’s a durable replacement for a worn coil and installs easily—just set the correct gap and reconnect the wiring for smooth operation.

Fix Number

FIX11829380

Manufacturer Part Number

595304

Ignition coil 595304 is an original equipment manufacturer (OEM) part that fits Briggs & Stratton lawn and garden equipment engine models 31R907-0018-G1, 33R877-0002-G1, 33R877-0009-G1 and 33S877-0015-G1. Ignition coil 595304 generates the voltage for the spark plug. Set the ignition coil air gap at 10/1000-in to 14/1000-in. Torque the ignition coil screws to 30-lb-in.

Fix Number

FIX9044018

Manufacturer Part Number

590454

This genuine replacement magneto is designed for Briggs & Stratton engines used in Toro lawn mowers. It plays a vital role in the ignition system by generating the electrical current needed to fire the spark plug. Made from high-quality materials, this part is sold individually. Note: The spark plug boot is sold separately. To replace the magneto, begin by removing the housing or covers from your mower. Next, remove the spark plug and bind the cylinder to prevent it from turning. Disconnect the ignition wires and remove the old ignition coil. Install the new magneto, carefully setting the correct air gap between the coil and the flywheel. Once installed, reassemble the unit and test for proper operation. A screwdriver set is recommended for this repair.

Fix Number

FIX16753327

Manufacturer Part Number

24584201-S

This is a genuine item that is supplied by the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The ignition module is designed to deliver pulses of high voltage to the spark plug, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Unfortunately, over time, components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is sold individually.

Fix Number

FIX11835609

Manufacturer Part Number

21171-0743

This ignition coil assembly also knows as an armature-magneto is an authentic item that is supplied directly from the original equipment manufacturer. It is specially designed for use with Kawasaki engines. The purpose of this part is to supply electric current to the ignition system by producing pulses of high voltage for the spark plugs. It is made of durable metal with a rubber insulated wire and a spark plug boot.

Fix Number

FIX16444696

Manufacturer Part Number

84005272

This is a genuine OEM sourced replacement part designed for use with gas powered string trimmers and blowers. The ignition module also known as armature-magneto is designed to produce pulses of high voltage for the spark plugs. It is made from durable metal with a rubber insulated wire and it is sold individually. Please note the spark plug boot is sold separately.