Bolens Lawn Mower Parts

Bolens Appliance Parts

Popular Bolens Lawn Mower Parts

CABLE-CONTROL 37.5
$21.66
On Order
Fix Number
FIX19305064
Manufacturer Part Number
946-04661A
This is an authentic 51-inch control cable for walk-behind lawn mowers. This part is made up of a metal wire cable with a Z-type bent end on either side, and a 37.5-inch rubberized outer cover. When the control handle is released, the control cable stops the blade. If the cable breaks, the brake will not release even after pressing the lever. To remove the old cable, cut off any cable ties, remove the cable end from the control bail, and remove the control cable from the engine (you may need pliers). Remove the cables from the openings on the handle, which can be twisted off by rotating the cable at a 90-degree angle.
Mulching Blade
$35.34
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX9169783
Manufacturer Part Number
942-0741A
This is a mulching blade for your lawn mower. It is located underneath the lawn mower deck, and cuts the grass by rotating. This blade has a curved style shell, and includes extra cutting surfaces along the edges of the blade. If installed correctly this part will keep the grass clipping under the deck longer, and re-cut them. The blade is 21 inches long, and sold individually.
Fixes these symptoms
Upper Handle
$48.81
In Stock
Fix Number
FIX16424685
Manufacturer Part Number
749-05084B-0637
This replacement handle is a genuine OEM sourced part. It is specially manufactured for walk behind and push lawn mowers. Upper handle allows user to control the lawn mower. It is attached to the lower handle assembly that is sold separately. This part is made out of metal and is sold individually. Please note, the control bar, knobs and cables are all sold separately. You will need a wrench to replace this upper handle. • Disconnect the bail bar • Detach the control cable • Remove the bolts and the nuts that secure upper handle • Secure the new handle using the same hardware • Reattach the bar and the control cable
Axle Asm-rear 11
$53.57
In Stock
Fix Number
FIX16386134
Manufacturer Part Number
611-04144B
This authentic component is sourced directly from the original equipment manufacturer. It is specially designed for use with push lawn mowers. It is an identical replacement for a damaged or a missing rear axle assembly that was installed on a new unit. This is the part that the wheels are attached to. Refer to the diagrams of your model for the exact location and the correct installation of this component. Note, it is made of durable metal and is sold individually. You will need a wrench set and a screwdriver to remove the wheels, disconnect the old axle assembly and attach the new part.

Installation Instructions

Ricky from JOLIET, IL
The adjustment lever attached to the rear axel assembly, which is used to raise/lower the rear wheels was broken off.
Removed dust covers, nuts and rear wheels from rear axel assembly. Tipped mower onto side per manufactures instructions. Removed rear axel assembly from slots (standard screwdriver used here to pry). Installed new assembly by reversing the above steps. Read more...
Lawn Mower Flanged Lock Nut
$6.51
In Stock
Fix Number
FIX9095080
Manufacturer Part Number
712-04065
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.
Pin-bow Tie Cotter
$6.51
In Stock
Fix Number
FIX9096195
Manufacturer Part Number
714-04040
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.
Fixes these symptoms

Installation Instructions

Laura from CANDLER, NC
The right side of the mowing deck was dragging the ground.
I identified the area and compared it to the opposite side which still had the cotter pin and place. The cotter pin on the right side had been lost in the mowing process. I used pliers to attach the new pin and all is well! Super glad to find a website that carries all parts for my dad's mower. He has dementia and can't remember where the manual is so I was glad to find fix.com. Read more...
★★★★★
★★★★★
4 Reviews
Fix Number
FIX9988561
Manufacturer Part Number
647-04271-0637
This is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman lawn mowers. The grass bag frame supports and hold the grass bag in place, while it is collecting grass clippings. To install or replace the grass bag frame requires no tools. This part is made of metal and is sold individually.
Nut-flglk 5/16-18
$6.51
In Stock
Fix Number
FIX9092936
Manufacturer Part Number
712-04063
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD
Replace sheave plate and side skid shoes on snowblower.
Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop!
Read more...
★★★★★
★★★★★
3 Reviews
Fix Number
FIX9103444
Manufacturer Part Number
731-07203
This replacement trail shield is specially designed for use on walk-behind lawn mowers. It is an authentic item that is sourced from original equipment manufacturer and it is sold individually. This plastic trail shield is secured in the back of the deck to protect the user from grass clipping and debris. Please note the hardware to secure it is not included it is sold separately.
Lawn Mower Zone Control Cable
$21.82
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX9180334
Manufacturer Part Number
946-1130
This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pressed, the cable activates the blade rotation; releasing the handle stops the blade, ensuring operator safety. This specific part features a 40-inch covered housing with a total cable length of 53 inches, including 13 inches of exposed cable. It is sold individually and includes all necessary components for straightforward replacement. Please note that part number 946-1137 features a fully covered cable with a length of 53 inches. To ensure proper fit and function, carefully compare your existing cable before ordering.
Fixes these symptoms

Installation Instructions

Joseph from San Jose, CA
Broken control cable and handle
Really straight forward, can be done without tools. Great price for parts and job done for less that half of what it would cost to have a shop do it. Even a lazy teenagers can do it....:) mine did:) Read more...

Bolens Lawn Mower Appliance Types

Related Bolens Lawn Mower Parts

Popular Bolens Lawn Mower Models