Ariens Lawn Mower Control Cables

Fix Number

FIX9015022

Manufacturer Part Number

532183567

This is a lawn mower engine control cable, also sometimes referred to as a zone control cable. This part is sourced directly from the manufacturer and is sold individually. It is comprised of a metal wire with Z-type bent ends, a rubberized exterior, and a plastic clip. This part is designed to stop the engine when you release the handle. The conduit measures approximately 52.5 inches and the cable measures roughly 61.5 inches.

Fix Number

FIX9019323

Manufacturer Part Number

532435111

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered and Poulan. This part attaches the lever to the idler arm on the mower deck and grants you access to disengage and engage the blades. This manual clutch cable includes the cable, cable sheath with connection clips and the spring hook. You will need a socket set to replace this part. This part is made of metal, rubber and wire.

Fix Number

FIX9014267

Manufacturer Part Number

532183281

This is a genuine item is supplied by the original equipment manufacturer for use with Poulan rotary lawn mowers. It is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to check the owner's manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rubberized engine zone control cable is sold individually.

Fix Number

FIX9016384

Manufacturer Part Number

532194653

This replacement part is supplied directly from original equipment manufacturer for use with walk behind/push mowers. The drive control cable is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. This cable assembly consists of a metal wire cable with z-type bent ends, rubberized cover/body and a plastic clip. Replacing this cable is a simple task that may require pliers. • First you want to see where the old cable is attached • Just remove one cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Once both ends are attached, push the upper mount assembly of the old cable out of the hole in the upper handle • Tie the cable in place just as the old one was (make sure to leave enough clearance and free play to avoid over-bending and breaking the new cable)

Fix Number

FIX12658052

Manufacturer Part Number

532168552

It is an authentic OEM sourced replacement part which is specially produced for use with Weed Eater and Poulan walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. It is a high-quality rubber insulated component which is sold individually.

Fix Number

FIX9015713

Manufacturer Part Number

532197802

This part is an OEM from Husqvarna, Poulan and Weed Eater for use with Lawn Tractors. The Interlock switch disables the ignition system if it detects the lawn tractor is started or running in unsafe operating conditions. The most common reasons for replacing the clutch interlock switch are when the mower won't start or starts when the brake is not depressed. This part is sold individually. The tool that you will need to replace the clutch interlock switch is a -+ inch socket.

Fix Number

FIX9016842

Manufacturer Part Number

532197991

Fix Number

FIX11833714

Manufacturer Part Number

06900535

Fix Number

FIX8800564

Manufacturer Part Number

06900013

This is an authentic item that is supplied directly from the original equipment manufacturer for use with Ariens walk-behind lawn mowers. The purpose of the traction cable is to engage the drive wheels, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. It is connected to the traction bail and then attached to the traction bracket near the transmission, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality rubber insulated cable is sold individually.

Fix Number

FIX9287099

Manufacturer Part Number

532198885