Echo Hedge Trimmer Engines

Fix Number

FIX9177819

Manufacturer Part Number

A101000000

This piston ring is an authentic manufacturer approved replacement part. Is is commonly used on Echo gas trimmers/edgers. The purpose of a piston ring is to create an air tight seal inside the cylinder. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase. This would cause low compression and a loss of power. Replacing an o-ring should resolve this issue. This part is made out of metal and is sold individually. To complete this repair you will need a set of wrenches, pliers and a screwdriver. • Remove the air cleaner • Drain the fuel • Remove the air cleaner case • Remove the carburetor • Remove the intake insulator • Remove the spark plug • Remove the engine cover • Remove the insulator gasket • Remove the starter assembly • Remove the fuel tank • Remove the air duct • Separate the engine • Bind the engine • Remove the clutch • Remove the flywheel • Remove the starter pulley • Unbind the engine • Remove the muffler • Separate the cylinder from the crankcase • Remove the piston ring • Install the piston ring • Reassemble and test the equipment

Fix Number

FIX9179622

Manufacturer Part Number

A101000010

This is an original Echo replacement part manufactured for use with outdoor power equipment. The piston ring is used to form a seal between the crankcase, and cylinder. Wear can occur on piston rings from dirt in the cylinder or lack of oil. A worn ring can cause damage to the cylinder, piston, and can lead to a lack of compression when the seal is broken. This piston ring is sold individually.

Fix Number

FIX9321825

Manufacturer Part Number

P021007712

This is a genuine OEM sourced replacement part that has been sourced from the original manufacturer to be used with trimmers, hedge clippers, pruners, edgers, and blowers. The piston fits inside the cylinder and links with the connecting rod. The piston is used to separate the combustion chamber and the crankcase. The piston moves up and down inside the cylinder during the ignition sequence and this action drives the crankshaft. This kit includes the piston, ring, clips, and pin.

Fix Number

FIX9180848

Manufacturer Part Number

A130000540

This is an authentic replacement part sourced directly from the manufacturer. The cylinder is commonly found in yard tools from Echo, such as trimmers, pruners, edgers, and hedge clippers. This part is made of metal, and is used to house the piston assembly and provide power to the machine. You will require an Allen wrench or hex key when replacing this item. This product is provided as an individual replacement part.

Fix Number

FIX9315692

Manufacturer Part Number

C532000121

This is a genuine OEM sourced part used on many hedge trimmers. The metal connecting rod assists with securing the blade, and is sold individually. Keep in mind, two are needed. A hex key or a screwdriver are often necessary for the removal and replacement.

Fix Number

FIX10043455

Manufacturer Part Number

C532000181

Fix Number

FIX8817229

Manufacturer Part Number

10001109560

This is a genuine item that is sourced directly from the original equipment manufacturer for Echo lawn and garden equipment. The ring helps to create a tight seal between the piston and the cylinder walls. A worn or broken piston ring will allow combustion gasses to escape the seal and enter the crankcase causing low compression and the loss of power. If compression is reduced significantly, the engine will not be able to run at all. Please note this high-quality component is made of durable metal and is sold individually.

Fix Number

FIX9178930

Manufacturer Part Number

A101000170

This is an authentic OEM sourced replacement piston ring which is specially designed for use on Echo handheld lawn and garden equipment. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, this will cause low compression and a loss of power. If compression is reduced significantly, the engine will not run at all, replacing piston rings should resolve that issue. This part is made of high-quality metal and is sold individually.

Fix Number

FIX12089284

Manufacturer Part Number

P021050840

Fix Number

FIX9291725

Manufacturer Part Number

61080554030