Kawasaki Engine Seals and Gaskets

Kawasaki Appliance Parts

Popular Kawasaki Engine Seals and Gaskets

Rocker Cover Gasket
$7.29
In Stock
Fix Number
FIX9258658
Manufacturer Part Number
11060-7013
This is an Authentic Manufacturer Sourced replacement part used on Kawasaki Engines. This rocker cover gasket is for the cylinder head. It is sold Individually. It provides a strong seal to protect from leaks. Over time gaskets tend to deteriorate and would need to be replaced. You would need a Wrench to replace this item.
O-ring
$6.51
In Stock
Fix Number
FIX9058832
Manufacturer Part Number
670D2016
This is an authentic OEM product from Kawasaki which is designed for use with engines commonly installed on lawn and garden equipment. It provides an air-tight seal for the oil filler. Over time the material may wear out and begin to crack eventually requiring a replacement. This item is sold individually and is made of durable rubber. Check the diagrams of your model for the correct installation of this O-ring. Note, you will need a properly sized or an adjustable wrench to remove and resecure the bolt that holds the filler tube in order to perform this repair.
Gasket
$6.51
In Stock
Fix Number
FIX16664422
Manufacturer Part Number
11061-1285
This replacement gasket is an authentic manufacturer sourced item that is specially designed for Kawasaki engines. This item provides an air tight seal for the rocker case, over time gaskets tend to deteriorate and get compresses eventually requiring replacement. One durable composite material gasket is sold individually, to replace it you will need a wrench.
Muffler Gasket
$6.51
In Stock
Fix Number
FIX8840445
Manufacturer Part Number
11060-7016
This is a genuine Kawasaki replacement part designed for use with lawn mowers/tractors. It is supplied directly from original equipment manufacturer. This gasket is used to provide a tight seal for the muffler. Over time it will crack allowing for leaks, requiring replacement. It is made out of composite material and it is sold individually. To replace this gasket you will need a wrench.
Seal-oil Rvc2 6x11x10.2
$10.96
In Stock
Fix Number
FIX18214116
Manufacturer Part Number
92049-0862
This is a genuine OEM sourced replacement part designed for use with Kawasaki engines. The purpose of this part is to create an air tight seal so the oil does not leak from the cylinder head. This item is made out of metal and rubber material. It is sold individually. When replacing this you would need a set of wrenches, pliers and a screwdriver.
Oil Seal
$6.51
In Stock
Fix Number
FIX9157914
Manufacturer Part Number
92049-7019
It is a genuine item that is supplied by the original equipment manufacturer for Kawasaki engines commonly installed on a variety of lawn and garden equipment. This is a special component that provides a tight seal around the governor shaft. Over time it may wear out and begin to crack eventually requiring a replacement. One durable rubber part is included. Check the appropriate diagrams for your specific model to ensure the correct installation of the new seal-oil. To perform this repair you will need a variety of tools such as a screwdriver, a wrench set, pliers and a tool to pick out the old seal. Make sure to drain the oil before starting this repair.
Gasket-chamber
$6.51
In Stock
Fix Number
FIX8840468
Manufacturer Part Number
11061-7009
This is an authentic OEM part. The Kawasaki chamber gasket is constructed of rubber and is compatible with many 4 stroke engines. The gasket secures the float chamber to the float in the carburetor assembly. This part is sold individually. However, it is also included in the carburetor assembly (15003-7061). A wrench set and a screwdriver are helpful in making the replacement. It is encouraged to refer to specific engine manual and diagrams for repair instructions.
Oil Seal
$7.29
In Stock
Fix Number
FIX9158704
Manufacturer Part Number
92049-7011
This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to provide a tight seal for the crankcase. Over time it may wear out and begin to crack eventually requiring a replacement. For the exact location and the correct installation please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.
Head Gasket
$13.13
In Stock
Fix Number
FIX8840800
Manufacturer Part Number
11004-7006
This genuine replacement part is sourced from original manufacturer. It is used on Kawasaki engines. Its purpose is to make an air tight seal so that no air/oil leakage occurs. Over time this gasket will deteriorate and will need to be replaced. This item is made out of composite material and it is sold individually. Co complete this repair you will need a wrench.
Gasket-head
$32.16
In Stock
Fix Number
FIX16664324
Manufacturer Part Number
11004-0762
This is an authentic Kawasaki replacement part manufactured for use with small engines. This special head gasket is used to seal the connection between the cylinder head and the cylinder/crankcase. The head gasket is available as an individual replacement part, please see model diagram for associative parts.

Related Kawasaki Engine Parts