Echo Engine Hardware

Fix Number

FIX8859978

Manufacturer Part Number

13211546730

This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.

Fix Number

FIX8917824

Manufacturer Part Number

21041752730

Genuine OEM replacement part,this item is sold individually. The purpose of the Wing Bolt is to secure the Air Filter Cover and Air Filter to the Air Cleaner Case on all of the Outdoor Products shown below.

Fix Number

FIX10053748

Manufacturer Part Number

V490001230

This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.

Fix Number

FIX9261895

Manufacturer Part Number

13201309820

This is a genuine OEM replacement part, it is sold individually. Made of metal. Its purpose is to secure the fuel line to the fuel filter. It is commonly used with outdoor lawn equipment, and is compatible with the model numbers shown below.

Fix Number

FIX9148697

Manufacturer Part Number

90050000005

This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.

Fix Number

FIX9308885

Manufacturer Part Number

90060300005

This washer is available as an individual replacement part. It is used in various lawn and garden tools made by Echo and Shindaiwa. The washer attaches to the cylinder cover with a screw. It is made out of metal and is very small, so it will need to be replaced if it becomes lost or broken. An allen wrench will be needed when replacing this washer which is an authentic OEM part.

Fix Number

FIX17016293

Manufacturer Part Number

V202000830

This Genuine OEM screw is a standard replacement part used on a variety of gas-powered trimmers and brushcutters. Constructed from durable metal and sold individually, this screw is typically used to secure the starter cover to the unit, ensuring a tight and stable fit during operation. The screw features a 4x16 thread size and requires a hex key or Allen wrench for proper tightening or removal. Replacing worn or stripped screws helps maintain the structural integrity of your equipment and ensures continued safe use.

Fix Number

FIX9162891

Manufacturer Part Number

90060000005

This washer fits gardening tools such as hedge trimmers, leaf blowers, chainsaws, engines, power brooms, tillers, water pumps, concrete saws, and cultivators. *Please note: this is sold individually. The washer helps spread the pressure evenly between two connected parts in your tool. For proper installation and application, check the diagram provided by the manufacturer.

Fix Number

FIX9162459

Manufacturer Part Number

90023805020

This replacement part is an authentic OEM screw designed for use with blowers and string trimmers. This is a standard hardware which has multiple uses based on equipment. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To secure or loosen this screw you would need a phillips head screwdriver.

Fix Number

FIX9150354

Manufacturer Part Number

90010505055

This genuine OEM replacement part is specially produced for Shindaiwa and Echo handheld lawn and garden equipment. It is generally used to secure the muffler, for correct application of this hardware please make sure to check appropriate diagrams of your unit. This hex socket head bolt is made from durable metal and it is sold individually. When installing or removing this bolt you will need a hex key which is also known as an allen wrench.