Cub Cadet Engine Hardware

Fix Number

FIX9088496

Manufacturer Part Number

710-1044

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.

Fix Number

FIX9298671

Manufacturer Part Number

710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Fix Number

FIX9095080

Manufacturer Part Number

712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Fix Number

FIX9092936

Manufacturer Part Number

712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Fix Number

FIX9298768

Manufacturer Part Number

710-0599

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches long, and has 20 threads per inch. This style is a hex head with a built-in washer that will cut its own threads in most predrilled steel.

Fix Number

FIX9087241

Manufacturer Part Number

710-0895

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.

Fix Number

FIX9090945

Manufacturer Part Number

710-1652

This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is used with different types of machines and the application of the screw can vary based on the model of the equipment. This screw is sold as an individual replacement part.

Fix Number

FIX9298748

Manufacturer Part Number

710-0528

This screw is a high quality hardware that is specially manufactured for use on MTD and Yard Machines lawn and garden equipment. It is an authentic part that has multiple uses depending on the equipment. Make sure to check appropriate diagrams for correct location and applications of this screw. Please note, one hex head screw is included per order that will require a wrench to install or remove it.

Fix Number

FIX9311087

Manufacturer Part Number

936-0119

If the shafts in the drive belt pulley assembly spin freely when they should remain locked together, this lock washer may need replacement. The silver metal washer maintains tension on the pulley shaft nut to help keep it secure, it measures 5/16 inches inside and 0.5 inches outside. Sold individually, you should confirm compatibility with your equipment before purchasing this washer.

Fix Number

FIX9096328

Manufacturer Part Number

720-0279

This handle knob is an authentic OEM replacement part. It is customarily used in Ryobi and MTD lawn mowers. This knob is used to make adjustments to the upper handle of the lawn mower. This part is made of plastic and should be replaced if it comes off the machine. It is sold individually and requires no tools to install.