Edger Starters

Fix Number

FIX10039400

Manufacturer Part Number

A051001312

This is an authentic OEM sourced replacement recoil starter assembly. It is specially designed for use with Echo handheld lawn and garden equipment. This is the starter assembly that allows user to start the equipment. This assembly consists of a plastic shroud, starter pulley, recoil spring, plastic handle grip and the the pull rope. Please note, the hardware to secure this assembly is sold separately. To complete this repair you will need a hex key also known as an allen wrench. • First remove the (4) screws that secure the old assembly • Remove old assembly and secure the new one

Fix Number

FIX9282878

Manufacturer Part Number

503873305

This is an authentic starter pawl bridge which is sourced directly from original manufacturer. This item provides the resistance needed for the starter rope to start the trimmer. It is made out of metal and it is sold individually.

Fix Number

FIX9981917

Manufacturer Part Number

579063101

This is an authentic OEM sourced replacement starter housing which is designed for use with Husqvarna lawn and garden equipment. It is the starter housing assembly which is used to pull-start the engine. It is a complete assembly which includes a durable plastic housing, starter pulley, starter spring, and the pull rope with the grip, please note the hardware to secure this assembly is sold separately.

Fix Number

FIX9008182

Manufacturer Part Number

530069232

This is a 3ft rope for a variety of power tools, most commonly chainsaws. It twists around the pulley of the recoil starter, which will allow you to pull-start the engine. This part is made of a durable nylon, but over time may wear out and snap. When that happens, you will need to replace it. Take note the plastic grip is sold separately.

Fix Number

FIX9268006

Manufacturer Part Number

17720042033

This is a genuine manufacturer sourced replacement starter assembly. It is designed for use with handheld lawn and garden equipment. This is the starter assembly that allows user to start the unit by pulling grip/rope. It includes a plastic shroud/housing, starter pulley, starter spring, grip and the the pull rope. Please note the hardware used to attach this assembly and the starter pawl assembly. To complete this repair you will need a screwdriver. • First remove four (4) screws that secure the assembly • Remove old assembly • Secure the new one and test the unit

Fix Number

FIX9982864

Manufacturer Part Number

585530301

It is a genuine component that is supplied by the original manufacturer to use for a Husqvarna trimmers. This part is made of steel and hard plastic. This part includes the drive pulley, rewind pulley, recoil spring and a drive spring. If the engine does not start, has a hard time starting or the pull rope does not retract then it is time to replace this part. Before replacing this part, please make sure the engine is cooled and you remove the wire and boot from the spark plug to avoid the engine by starting.

Fix Number

FIX9178991

Manufacturer Part Number

A052000160

This item has been OEM sourced to be used with trimmers, blowers, hedge clippers, gas-powered drills, edgers, and pruners. The starter pawl is used as a connection between the flywheel and the recoil pulley. This item spins when the starter rope is pulled and in turn, the flywheel gets rotates to start the motor. This item is a complete part that includes both springs and both pawls.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX10040084

Manufacturer Part Number

A100998

This is a genuine replacement part manufactured for use with lawn edgers. The starter assembly is a complete recoil starter including the pulley, rope, handle, ratchets, guide pan, and springs. Components of the starter assembly can wear out from normal use or fall out of line with each other. It can save time by replacing the whole assembly rather than rebuilding it. This starter assembly is sold as an individual replacement part.

Fix Number

FIX9178992

Manufacturer Part Number

A052000180

This starter pulley assembly is an authentic Echo replacement part manufactured for use with outdoor power equipment. The starter pawls, and springs can wear out from normal use, and replacing the pulley assembly can be less time consuming than replace all the parts individually. The starter pulley assembly is sold individually.

Fix Number

FIX8898679

Manufacturer Part Number

17721844330

This is a genuine OEM part. The Echo starter pawl is made of durable plastic, and is compatible with many hedge trimmer devices. This component secures the return spring in the starter pawl assembly. The starter pawl is sold individually. Please keep in mind, this part is also included with the starter pawl assembly (A052000160). A hex key and a screwdriver are needed for the removal and replacement. It is encouraged to refer to the specific manual and diagrams for further repair instructions.