Murray Edger Hardware

Murray Appliance Parts

Popular Murray Edger Hardware

Lawn Mower Nut
$8.00
In Stock
Fix Number
FIX9999668
Manufacturer Part Number
703409
This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.
Nut, Cntr Lck, 3/8-16
$9.60
In Stock
Fix Number
FIX10000167
Manufacturer Part Number
703893
This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications based on your equipment. Please refer to diagrams for proper use. This item is metal an is sold individually. You would need a wrench to tighten/loosen this nut.
Snow Blower Hex Locknut
$7.18
In Stock
Fix Number
FIX9999581
Manufacturer Part Number
703251
This is an authentic OEM sourced replacement component which is specially made for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality hex nut is made of durable metal and is sold individually.
Lawn Mower Cotter Pin
$6.25
Special Order
Fix Number
FIX9999599
Manufacturer Part Number
703312
It is a standard hardware which may have multiple applications. This is a genuine OEM sourced cotter pin designed for use with Murray, Simplicity, and Snapper lawn tractors. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Please refer to the appropriate diagrams for your model to ensure the exact location and the correct use of this component. This cotter pin is made of durable metal and is sold individually. You may need pliers to remove and secure it.
Lawn Mower Locknut Flange
$6.25
In Stock
Fix Number
FIX10000267
Manufacturer Part Number
704067
This is a nut for your lawn and garden equipment. The diameter is 5/16 inches with a thread size of 18. The nut has a washer like base, with a wide flange to ensure it will not loosen with heavy vibrations.
Edger Carriage Bolt
$6.25
In Stock
Fix Number
FIX9999520
Manufacturer Part Number
703159
This is an authentic OEM replacement part designed for use with Murray lawn and garden equipment. This bolt is a standard hardware which has multiple uses based on your equipment. Please check diagrams for correct application/use of this bolt. It has a square area under the head to secure the bolt while the lock nut is being tightened. This bolt is sold individually.
Nut
$6.25
In Stock
Fix Number
FIX9999522
Manufacturer Part Number
703164
The nut attaches to the compression spring. This authentic item is supplied directly from the original equipment manufacturer for use with edgers, lawn tractors, and lawn mowers made by Murray, Snapper, and Simplicity. It is made of metal and is sold individually. If this part becomes broken it will need to be replaced and may require a wrench during the installation.
Nut, 1/4-20, Nylock
$6.40
In Stock
Fix Number
FIX9999570
Manufacturer Part Number
703232
This hex nut is created for use on lawn and gardening equipment. This is a multi-application nut that depends on the unit and tool you are using. For installation instructions, check the manual provided by the manufacturer. *Please note: this nut is sold individually.
Nut, 3/8-16
$6.92
In Stock
Fix Number
FIX9999611
Manufacturer Part Number
703333
This is a genuine manufacturer-sourced component which is specially designed for use with Murray riding lawn mowers and garden tractors. It is a standard hardware which may have multiple applications. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality nut is made of durable metal and is sold individually.
Nut, 1/2-20wdf;
$8.18
In Stock
Fix Number
FIX9279927
Manufacturer Part Number
46023MA

Related Murray Edger Parts