Official Husqvarna Edger Handles

Left Hand Throttle Housing

$9.79

Fix Number: FIX9031109
Manufacturer Part Number: 545223201

This replacement throttle housing is specially designed for use with Husqvarna trimmers and edgers. It is an authentic OEM sourced part, not an aftermarket imitation. This is the left hand side plastic housing piece only. Please note, the right hand side housing piece and the hardware to secure the two pieces together are all sold separately. To complete this repair you will need a screwdriver.

Trigger

$7.65

Fix Number: FIX9034300
Manufacturer Part Number: 574355301

This is an authentic OEM part used in the Husqvarna trimmers listed below. This is the main trigger throttle mechanism attached to lower part of handle. While disassembling handle for this repair, be sure to separate pieces carefully so that no springs are lost. Note detailed positioning of all parts before removing them; proper positioning is vital to tool functioning. Sold individually. Throttle trigger spring is available separately, as part # 530016454. Note that this trigger fits serial number 2010-73N and higher. For lower serial number models, see trigger part # 545066001.

Handle Assembly

$35.15

Fix Number: FIX11823982
Manufacturer Part Number: 574193001

This is a genuine OEM sourced part which is specially designed for Husqvarna trimmers and edgers. It is an identical replacement for a missing or a damaged handle assembly that was installed on a new unit. The handle provides a user with a comfortable grip to operate the unit. It also houses the switch which controls the throttle. Keep in mind this high-quality handle assembly is sold as an individual item. Please make sure to refer to the appropriate diagrams for your model to ensure the proper repair procedure. A screwdriver and pliers might be needed to replace this handle assembly.

Housing, Throttle (rh)

$17.55

Fix Number: FIX9037355
Manufacturer Part Number: 545223001

This replacement throttle housing is a high quality OEM item that is specially designed for Husqvarna string trimmers and edgers. This is the right hand side plastic housing piece, please note that the left hand side piece and the hardware to secure the two halves are all sold separately. To complete this repair you will need a screwdriver.

Trigger

$6.95

Fix Number: FIX11823981
Manufacturer Part Number: 574192501

The trigger goes next to the spring and the throttle lockout. It is a genuine item that is supplied by the original equipment manufacturer for use with Husqvarna trimmers and edgers. This part is available individually and is made of plastic. During replacement, it may require a screwdriver and a set of pliers to help install this part correctly. It will require replacing if it becomes broken.

Throttle Assembly

$10.95

Fix Number: FIX11824007
Manufacturer Part Number: 574489001

This is an authentic manufacturer made replacement part which is specially designed for use with Husqvarna trimmers. The throttle control controls the engines speed. This part is made of metal and is sold individually. For installation, you will need a wrench and screwdriver. Make sure that the engine has cooled before you start the repair.

Trimmer Throttle Trigger

$12.05

Fix Number: FIX9282882
Manufacturer Part Number: 503877903

This is an authentic Husqvarna replacement part compatible with the tools listed below. It works in conjunction with the throttle spring, part # 537011301, and a throttle cable. During this repair, dismantle handle slowly to keep control of the tensioned spring. Also be sure to take detailed note of the orientation of all associated parts. Correct positioning of these parts is vital for tool to function properly. Sold individually.

Lever

$9.85

Fix Number: FIX8989278
Manufacturer Part Number: 503918101

The plastic lever attaches to the spring and the throttle trigger. This is an OEM part sourced directly from the manufacturer and used in Husqvarna and Jonsered trimmers, pole saws, edgers, and brushcutters. This is available as in individual replacement item. This lever may become broken and will need to be replaced. During replacement, a screwdriver may be needed to install this part.

Lockout, Throttle

$7.65

Fix Number: FIX9034443
Manufacturer Part Number: 574355401

This is an OEM part sourced directly from the manufacturer. The throttle lockout is found in Husqvarna trimmers. This part is made of high-quality plastic, and is used in conjunction with the trigger to activate the machine. It is a safety feature to prevent inadvertent activation. You may require an Allen wrench or hex key when replacing this item. The throttle lockout is available as an individual replacement part.

Handle Half Hsg Lh

$17.55

Fix Number: FIX8992069
Manufacturer Part Number: 503995601

This is an original Husqvarna replacement part manufactured for use with trimmers and brushcutters. The plastic handle is used to house the throttle trigger and trigger lock. This handle is available as an individual replacement part, please note the right-hand half of the handle is available separately. Recommended parts: • Handle, part number: 503995602

Husqvarna Edger Handles

Popular Husqvarna Edger Handles

Related Husqvarna Edger Parts

Husqvarna Edger Handles

Start With Your Model Number

Popular Husqvarna Edger Handles

Related Husqvarna Edger Parts