Bolens Edger Parts

Fix Number

FIX9095080

Manufacturer Part Number

712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Fix Number

FIX9172714

Manufacturer Part Number

954-04032B

This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmission, which propels the wheels on your machine. Pro tip, clean off the pulleys before installing this part for a longer lifespan. We recommend inspecting your belt periodically as they wear out quickly, depending on usage.

Fix Number

FIX9092936

Manufacturer Part Number

712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Fix Number

FIX10003369

Manufacturer Part Number

712-0417A

This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a washer to ensure the nut fastens to the components surface proportionately. If it has been removed when doing repairs or taking components apart, it should be replaced, and never re-used. All the nuts on your equipment should be inspected and tightened at least annually. To remove this hex flange nut, you will need a 15/16-inch socket. The torque spec for this nut is 70-90 ft-lbs.

Fix Number

FIX9129938

Manufacturer Part Number

781-0080-0637

★★★★★

★★★★★

1 Review

Fix Number

FIX10007704

Manufacturer Part Number

747-04110A

Fix Number

FIX9311087

Manufacturer Part Number

936-0119

This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following appliances: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.

Fix Number

FIX10001864

Manufacturer Part Number

710-1205

Fix Number

FIX9109078

Manufacturer Part Number

720-04072A

This star knob specifically fits a variety of lawn mowers and is used to secure both the lower and upper handles of your lawn mower. If your knob is worn out or loose, then replacing it will solve your problem. No tools are required for this repair. For installation instructions and more information on the part, refer to the manual provided by the manufacturer. This knob is secured with a carriage bolt, which is sold separately. *Please note: this knob is sold separately as well.

Fix Number

FIX9491339

Manufacturer Part Number

941-0524A