MTD Chipper Shredder Hardware

Fix Number

FIX9092936

Manufacturer Part Number

712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Fix Number

FIX9095080

Manufacturer Part Number

712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Fix Number

FIX9298768

Manufacturer Part Number

710-0599

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches long, and has 20 threads per inch. This style is a hex head with a built-in washer that will cut its own threads in most predrilled steel.

Fix Number

FIX9298671

Manufacturer Part Number

710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Fix Number

FIX9299574

Manufacturer Part Number

712-04064

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.

Fix Number

FIX9087241

Manufacturer Part Number

710-0895

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.

Fix Number

FIX9299591

Manufacturer Part Number

712-04217

It is an authentic OEM sourced item which is specially produced for use with lawn mowers made by MTD, Bolens, Yard Man, Yard Machines, Troy-Bilt, and Cub Cadet. The flange lock nut attaches to the rear wheel. It may require a socket set during installation and will need to be replaced if it becomes broken. This item is priced individually and is made out of metal.

Fix Number

FIX9088770

Manufacturer Part Number

710-1260A

Fix Number

FIX9298748

Manufacturer Part Number

710-0528

This screw is a high quality hardware that is specially manufactured for use on MTD and Yard Machines lawn and garden equipment. It is an authentic part that has multiple uses depending on the equipment. Make sure to check appropriate diagrams for correct location and applications of this screw. Please note, one hex head screw is included per order that will require a wrench to install or remove it.

Fix Number

FIX9311087

Manufacturer Part Number

936-0119

This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following snowblowers: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.