Chainsaw Switches

Fix Number

FIX11824426

Manufacturer Part Number

582107601

This is a genuine OEM power take-off (PTO) switch for a ride-on lawn mower. This switch engages the electric clutch to spin the blades. This part includes one plastic PTO switch with a push-pull, snap mount and eight terminals. Mechanical switches, such as this one, will break down over time, and will need to be replaced. This is a quick and easy repair. Disconnect the spark plug before you begin. Disconnect the wires under the housing, remove the old switch by pressing the side tabs. Place the new PTO switch into position, reconnect the wires and spark plug, and test your equipment to make sure it is working.

Fix Number

FIX9013223

Manufacturer Part Number

532176138

It is a genuine manufacturer-approved part which is specially designed for Ryobi and Husqvarna riding lawn mowers and garden tractors. The purpose of the switch-interlock is to act as a safety feature which will shut the engine off when equipment is started or running in unsafe operating conditions. Unfortunately, over time parts will wear out and it may begin to fail eventually requiring a replacement. Refer to the owner\'s manual and the appropriate diagrams for your model for the correct location and installation of this component. Note, this high-quality plastic body interlock switch is sold individually. You will need a screwdriver to perform this repair.

Fix Number

FIX18684639

Manufacturer Part Number

039850001109

Fix Number

FIX8991581

Manufacturer Part Number

503717901

This switch is specially designed to stop the engine when you move it to the stop position/setting. It is an authentic replacement item that is supplied from original equipment manufacturer for use with Husqvarna chainsaws. Includes one (1) switch per order. To replace this stop switch you will need a screwdriver. • Make sure to disconnect spark plug and drain fuel • Remove screws from the housing • Separate housing pieces • Disconnect wires from the old switch • Secure new stop switch in place • Reconnect the wires • Reassemble and test the new switch

Fix Number

FIX18789333

Manufacturer Part Number

760649001

Fix Number

FIX8839985

Manufacturer Part Number

110-6765

This part is sold individually and is made of plastic and metal. The single pole switch connects to the wiring harness. A set of pliers may be required to replace this part if it becomes broken. It is a genuine OEM sourced part which is specially designed for use with Toro and Lawn Boy for use in lawn tractors and riding mowers.

★★★★★

★★★★★

1 Review

Fix Number

FIX9282784

Manufacturer Part Number

503718201

This is an original replacement part manufactured for use with trimmers. The start/stop switch is also called the kill switch, and fits on the upper handle above the throttle. The red switch is used to shut of the engine, and has to be engaged to run the engine. The switch is sold individually.

Fix Number

FIX19510516

Manufacturer Part Number

2610001608

Fix Number

FIX8826201

Manufacturer Part Number

104-2541

The switch assembly goes next to the rocker switch and is made of metal. This is sold as a kit that contains the switch, the nut, and the lockwasher. These are OEM parts from Toro and Lawn Boy for use in lawn tractors. If these items become broken they will need to be replaced and may require a wrench during the installation.

Fix Number

FIX9004922

Manufacturer Part Number

530069572

This is a genuine manufacturer-sourced replacement part which is specially designed for handheld lawn and garden equipment. The switch allows a user to turn the unit on and off, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality plastic body switch is sold individually.