Chainsaw Spark Plugs

Fix Number

FIX9263506

Manufacturer Part Number

15901019830

Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark plug has gone bad this can lead to a hard-starting engine, a misfire, or the engine not starting at all. Replacing it is very easy. Start by gapping your new spark plug according to the manufacturer specifications. For this repair, start by removing the boot from the old plug, use a wrench to remove it, and twist it off with your hand. Now thread the new replacement spark plug into place and tighten it using the wrench. This manufacturer-approved spark plug is sold individually.

Fix Number

FIX8996057

Manufacturer Part Number

503235111

By replacing your spark plug as part of your regular maintenance, this ensures a better performing engine, cleaner exhaust, faster starting, and a smooth-running engine. This spark plug is sourced directly from the manufacturer and is sold as a single unit. If upon inspection you notice the spark plug is dirty or otherwise damaged, it should be replaced right away. Removing the spark plug may require a wrench and should only take a few minutes to complete.

Fix Number

FIX8996058

Manufacturer Part Number

503235112

The spark plug is a key component in outdoor power equipment, providing the ignition needed to start and run engines smoothly. Commonly used in chainsaws, brush cutters, and other compatible tools, this high-quality part delivers a reliable spark for efficient combustion and dependable performance. Its durable design ensures consistent ignition even under demanding conditions, helping your equipment start easily and operate at peak efficiency. Replacing a worn or faulty spark plug is an important part of regular maintenance, as it helps prevent hard starts, misfires, and reduced engine power. With a precise fit and proven performance, this spark plug is an essential part for keeping your equipment running reliably season after season.

Fix Number

FIX16466706

Manufacturer Part Number

951-10292A

This is a genuine manufacturer approved replacement spark plug. It is an authentic OEM part commonly used on a variety of lawn and garden equipment. The purpose of a spark plug is to deliver electricity from an ignition system to the combustion chamber. Over time spark plugs tend to wear out, get dirty or fouled requiring replacement. Includes one (1) spark plug per order. You would need a spark plug wrench or a socket wrench to install the spark plug. Please note, after replacing it, you should gap the spark plug according to the owners manual of the outdoor product you have.

Fix Number

FIX11813657

Manufacturer Part Number

951-14437

This spark plug is designed for small gasoline engines to support easy starting, efficient combustion, and smooth, reliable operation. It delivers a strong, consistent spark to help reduce misfires, rough running, and performance loss caused by worn or fouled plugs. Simple to install and built to the proper heat range, it’s a dependable maintenance replacement for keeping outdoor power equipment running at its best.

Fix Number

FIX9314055

Manufacturer Part Number

A425000000

This is an authentic manufacturer sourced replacement part used on Echo and Shindaiwa lawn and garden equipment. A spark plug is designed to deliver the and electric spark that will ignite the combustible air-gas mixture inside a cylinder. Over time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You would need a spark plug wrench or a socket wrench to install the spark plug.

Fix Number

FIX9150685

Manufacturer Part Number

791-610311B

This is a spark plug, and it is used in a variety of outdoor equipment. The spark plug ignites the fuel in the engine by producing a small spark. This part is RDJ7Y, meaning it is a resistor type, with a shell design thread size of 14mm, reach of 13/40-inch (tapered seat), and 5/8-inch hex. The heat range is 7 for automotive, small engine, and ordnance, with a standard projected core nose. If this part has fouled (the tip is burnt or damaged) you will need to replace it. If the engine is not starting or is running poorly, you may need a new spark plug. We recommend draining the fuel from the tank, and removing the spark plug before making repairs on your machine.

Fix Number

FIX8869847

Manufacturer Part Number

15901010230

This spark plug is is a high quality item commonly utilized on Echo and Shindaiwa gas powered lawn and garden equipment. The purpose of a spark plug is to deliver the electric current from an ignition system to the engine. Over time spark plugs tend to get dirty or fouled eventually requiring replacement. Please note, one item is included per order. Replacing a spark plug you will need a spark plug wrench or a socket wrench.

Fix Number

FIX9929615

Manufacturer Part Number

2513214-S

This is an authentic replacement part, sourced from the original manufacturer for use with lawnmower engines from Kohler and Toro. The spark plug connects to the engine's cylinder and is used to create an electric arc to ignite the air/fuel mixture within the combustion chamber. A hex socket or spark plug wrench is needed to install this item.

Fix Number

FIX10018285

Manufacturer Part Number

870170001

This spark plug is an authentic Craftsman replacement part, and is compatible with chainsaws. The spark plug produces a spark that ignites the fuel in the engine. A socket wrench will be needed to install or replace the spark plug. This part is made of ceramic with metal and is sold individually.