Auger Hardware

Popular Auger Hardware

Lawn Mower Hex Washer Head Screw
$6.25
In Stock
Fix Number
FIX9298768
Manufacturer Part Number
710-0599
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches long, and has 20 threads per inch. This style is a hex head with a built-in washer that will cut its own threads in most predrilled steel.
Carriage Bolt 5/16-18 x 3/4" Lg.
$6.25
In Stock
Fix Number
FIX9298671
Manufacturer Part Number
710-0451
This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.
Fuel Line Clip
$6.25
In Stock
Fix Number
FIX10053748
Manufacturer Part Number
V490001230
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
Trimmer Nut
$6.25
In Stock
Fix Number
FIX9148697
Manufacturer Part Number
90050000005
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.
Washer-lock 5/16
$6.42
In Stock
Fix Number
FIX9311087
Manufacturer Part Number
936-0119
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following snowblowers: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.
Nut-flange, Ni
$6.25
In Stock
Fix Number
FIX8827741
Manufacturer Part Number
104-8301
This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this high-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.
Screw-hh
$6.25
In Stock
Fix Number
FIX8951631
Manufacturer Part Number
323-9
It is made of metal and is sold individually. The screw connects to the idler pulley. A socket set might be needed during the installation process. Over time this part may become stripped and will need to be replaced. This part is an OEM from Toro and Lawn Boy for use in snowthrowers, tillers, blower-vacuums, and lawn tractors.
Screw 5 X 55
$6.25
In Stock
Fix Number
FIX9150354
Manufacturer Part Number
90010505055
This genuine OEM replacement part is specially produced for Shindaiwa and Echo handheld lawn and garden equipment. It is generally used to secure the muffler, for correct application of this hardware please make sure to check appropriate diagrams of your unit. This hex socket head bolt is made from durable metal and it is sold individually. When installing or removing this bolt you will need a hex key which is also known as an allen wrench.
Nut-lock, Ni
$6.25
In Stock
Fix Number
FIX9276445
Manufacturer Part Number
3296-39
This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.
Clip
$6.25
In Stock
Fix Number
FIX9365362
Manufacturer Part Number
506707001
This is a genuine OEM replacement part used with many lawn and garden power tools. The metal clip is designed to secure components together, and is sold individually. You may need pliers for the removal and installation.