10253969-1-M-Black and Decker-90542632-Brush
Part Location Diagram of 90542632 Black and Decker Brush
See part 23 in the diagram
( Grid squares measure 1x1 inch )
10253969-1-S-Black and Decker-90542632-Brush Part Location Diagram of 90542632 Black and Decker Brush

Brush 90542632

$ 2.99
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10253969
Manufacturer #:
90542632
Manufactured by:
Black and Decker

Product Description

This is a genuine part supplied from the original manufacturer. It is commonly utilized on Black and Decker jigsaws. Carbon brushes are one of the most commonly replaced power tool parts. This is because they wear down over time. Causing intermittent motor function, reduced electric braking, and reduced power. This part comes with one carbon brush with an attached lead wire and spring. Please note the brush holder is sold separately. Refer to the owner's manual for your exact model for correct installation of this part.

  • Works with the following brands:
    Black and Decker
  • Works with the following products:
    Jig Saw