Part Location Diagram of 270016166 Ryobi Assembly Switch
See part 24 in the diagram
( Grid squares measure 1x1 inch )

Assembly Switch 270016166

★★★★★
★★★★★
1 Review
$19.08
On Order
Fix Number:
FIX11857058
Manufacturer #:
270016166
Manufactured by:
Ryobi

Product Description

This is an original Ryobi replacement part manufactured for use with impact drivers. The switch transfers electricity to the brushes, and can wear out over time. Symptoms of a bad switch are not turning on or off, and not changing speeds or directions. Replacing the switch on an impact driver is straight forward. You start by separating the two housing halves, and removing the motor. Disconnect the brushes, and remove the faulty switch. Then align the new switch, and reconnect the brushes. Be sure to run the wires in a direction to avoid pinching. Then just reconnect the motor, and halves of the housing. This switch is sold individually, the tools required are a screwdriver, and possibly needle nose pliers.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11857058
Manufacturer Part Number: 270016166
Brand Model Number Description
Ryobi P236 Impact Driver - 18V Impact Driver
Ryobi P236A Impact Driver - 18 Volt Impact Driver