Brush Card Assembly 22-22-2657

Genuine manufacturer approved replacement part designed for use with Milwaukee impact wrenches. This assembly holds carbon brushes around the armature to provide stable and safe contact. This assembly consists of: plastic holder ring, four (4) metal brush holders with springs and four (4) carbon brushes with lead wires attached. It also includes two (2) screws and two (2) washes used to secure the brush card. To replace this assembly you would need a screwdriver. • First remove screws holding the cover together • Carefully separate housing to gain access to armature and brush holder • Disconnect the wires • Remove the screws holding brush card assembly • Remove old brush holder and install the new assembly • Reassemble and test your tool