Part Location Diagram of 646694-03SV DeWALT Armature Assembly
See part 11 in the diagram
( Grid squares measure 1x1 inch )

Armature Assembly 646694-03SV

$ 0.00
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX11928176
Manufacturer #:
646694-03SV
Manufactured by:
DeWALT

Product Description

This armature is an authentic Dewalt replacement part. It is sourced from original equipment manufacturer for use with impact wrenches. The armature is a key component of an electric motor. In conjunction with a field it is what creates the motion. Over time, especially if the tool is constantly overloaded, it may begin to smoke or spark. This is caused by worn out armature insulation. Replacing an armature should resolve the issue and prevent further damage to the tool. It is recommended to replace both carbon brushes when replacing an armature. This assembly consists of an armature with the fan and both end bearings. When replacing an armature you will need a screwdriver set, a wrench set and pliers. • Make sure the tool is unplugged • Remove the housing • Remove the brushes • Remove the armature • Secure the new armature in place • Reassemble and test the tool