See part 4 in the diagram
( Grid squares measure 1x1 inch )
Product Description
-
Works with the following brands:DeLonghi
-
Works with the following products:Heater
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
October 20, 2021
Hello,
Does DeLonghi part #5210810031 (thermostat) fit the above mention oil radiator?
Thanks,
Joe
For model number DeLonghi Model #EW9707
Hello Joe, Thank you for your inquiry. We have researched the model number you have provided and show that this part will fit. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Michael G - October 2, 2020
Verified Purchase
Robust & dependable thermostat
Replaced an older model 3710's thermostat. This one is better. It seems more sensitive to truly shut off heating when the temp setting is reached (all settings 600W, 900W & 1500W). Also seems better built than original.
I will comment that 1. the connection electrical spades were in a different configuration than the orig. and it took me a while to test both with an ohm meter to figure out which should be the 'white' and which the 'black' connection. I used an ohm meter between the two when the points open on each to determine how to connect. 2. Once attached the temp setting dial scale was off compared to my original cover plate setting marks. The new Zero on the dial is at about 8 on the higher heat side of the scale and the snowflake symbol or the 1 is actually moderate heat. I can adjust to that and do not begrudge this anomaly at all because it works wonderfully on an old old heater.
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX10310446
Manufacturer Part Number: 5210810031
Manufacturer Part Number: 5210810031
Brand
Model Number
Description