10310446-1-M-DeLonghi-5210810031-Thermostat

( Grid squares measure 1x1 inch )

10310446-1-S-DeLonghi-5210810031-Thermostat

10310446-2-S-DeLonghi-5210810031-Thermostat

10310446-3-S-DeLonghi-5210810031-Thermostat

10310446-1-S-DeLonghi-5210810031-Thermostat 360 view

Thermostat 5210810031

★★★★★

1 Review

$9.79

Fix Number:: FIX10310446
Manufacturer #:: 5210810031
Manufactured by:: DeLonghi

Jump to:

Product Description
Questions and Answers
Related Parts
Customer Reviews

Product Description

This is an authentic OEM sourced replacement part which is specially designed for DeLonghi equipment. The thermostat is used to monitor the heat level in the machine, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is sold individually.

Works with the following brands:

DeLonghi
Works with the following products:
Heater

Works with the following brands:: DeLonghi
Works with the following products: Heater

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Related Parts Additional or alternate parts to consider.

Affresh Dishwasher Cleaner Tablets - 6

$22.91

Affresh Washing Machine Cleaner - 3 pack

$20.71

Produce Preserver Filter

$18.54

Affresh Washing Machine Cleaner Tablets – 6 Count

$28.91

Refrigerator Deodorizer

$32.12

Affresh Ice Machine Cleaner

$27.83

★ Customer Reviews

Average Rating: (1 Review)

5.0

★★★★★

Filter By Rating:

< Prev
1
Next >

Sort by:

★★★★★

Verified Purchase

Robust & dependable thermostat

Replaced an older model 3710's thermostat. This one is better. It seems more sensitive to truly shut off heating when the temp setting is reached (all settings 600W, 900W & 1500W). Also seems better built than original. I will comment that 1. the connection electrical spades were in a different configuration than the orig. and it took me a while to test both with an ohm meter to figure out which should be the 'white' and which the 'black' connection. I used an ohm meter between the two when the points open on each to determine how to connect. 2. Once attached the temp setting dial scale was off compared to my original cover plate setting marks. The new Zero on the dial is at about 8 on the higher heat side of the scale and the snowflake symbol or the 1 is actually moderate heat. I can adjust to that and do not begrudge this anomaly at all because it works wonderfully on an old old heater.