Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JOHN
May 10, 2023
My Product Guide says I have a 463344116 4-Burner gas grill but your system cannot identify it. I need the Electrode Set, F/Main Burner, 500MM wire. What is that part number, is it still available and for how much?
For model number 463344116
Hi John, Thank you for the question. The Electrode Set for Main Burner for this model is Fix Number: FIX16502949. All current prices are listed on the site. We hope this helps!
CharBroil model# 463375919
Verifying that this part is DHLG-12T / 21-12 with 2 outlets.
"220315" ANSI 221.92.
For model number 463375919
Hello Robert, thank you for the question. Yes, the part you are referring to is a 2 outlets electronic ignition module. We hope this information helps!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
View Less
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 3.5 / 5.0, 2 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Push button ignitor did not work with new battery. Carry over tubes rusted and broken.
Remove cooking grids and heat tents. Use pliers and screwdrivers to push hitch pins from posts on burner tubes holding carryover tubes. Remove carryover tubes. Wire brush posts to remove rust and scale. Insert new carryover tubes onto existing posts. Push new hitch pins through post holes to secure tubes. The posts are
... Read more threaded into the burner tubes, are slotted at the top and can be rotated with a screwdriver to adjust the hole height if needed. New metal channels may me different thickness than the old ones. Replace heat tents and grids.
Unscrew battery cap and plastic nut from ignition module, pull out on bottom of control panel slightly to allow module to be removed. Disconnect 2 wires from old module, place wires on new module. Insert new module into panel, secure with nut, install AAA battery and push button cap.
Test for ignition on main burner and then ignition on all other burners. Passed.
NOTE: Measure existing carryover tube channel length to ensure the correct part is ordered. Measure length of the rectangular channel and order the same length. DO NOT measure burner spacing, channel length is the dimension required. The FITS MODELS information is not always correct and I ordered the wrong size the first time. On Performance and Advantage models the burner tube spacing is different for 4 and 6 burners and use different length carryover channels. Compare measurements even though the description says fits 4 and 6 burner models.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
