This Ignition Switch Module is a genuine OEM approved Char-Broil replacement part. To ensure this is compatible with your Grill, please see the "Model Cross Reference List" below. This Ignitor Switch Module is what creates the spark inside your Grill to ignite it. Over time, components may wear out and begin to fail eventually requiring a replacement. If your Grill will turn on but will not ignite, you may need to replace the Ignitor Switch Module. This kit includes the Ignitor and the complete Wire Harness for all burners. Each kit is sold individually.
Works with the following brands:
Char-Broil
Works with the following products:
Grill
Works with the following brands:
Char-Broil
Works with the following products
Grill
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
February 8, 2022
need ignitor. can't' find one to order
For model number 463625219
Hi Kevin,
Thank you for your question. The part number listed under your model number for the main burner electrode is FIX16502873. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
This is a genuine manufacturer approved replacement part for use in Char-Broil RED Infrared Urban and Gourmet Grills. To ensure this part is compatible with your Grill, please see the "Model Cross Reference List" below. ...
This part includes one manufacturer-approved electronic ignition module with a black plastic battery cap. The electronic ignition module is what creates a spark needed to ignite the burner. It consists of two input termi...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Remove battery cover and battery. Removed the nut behind the battery cover and remove the module. This allows room to reach the switch. Remove the igniter switch nut and switch. Replace switch and switch wiring. Reassemble all and test operation.
Detached the wires with the tabs from the old switch whose casing had busted. Inserted new switch through hole in panel. Screwed nut down by hand until snug then reattached tabs with wires to new switch. Tested it and IT WORKS!!
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(7 Reviews)
4.9
★★★★★
★★★★★
Filter By Rating:
5★
6
4★
1
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joseph M - May 2, 2024
Verified Purchase
Just what I needed. Installed it and it works fine.
Good fit, works as expected.
★★★★★
★★★★★
John G - August 24, 2022
Verified Purchase
Worked as it should
2 thumbs up
★★★★★
★★★★★
Rhonda C - August 6, 2021
Verified Purchase
Ignitor switch module
We received the correct part and installed it and it works great. However, you sent another part that was not correct - the flame carryover tube was too short, it was not the correct part
★★★★★
★★★★★
Robert P - July 22, 2021
Verified Purchase
100% satisfied
Great product, fast delivery, and easy website to navigate.
★★★★★
★★★★★
Edward J - July 4, 2021
Verified Purchase
Happy Customer!
worked like a charm. Took all of 5 minutes to install
★★★★★
★★★★★
Donald P - June 8, 2021
Verified Purchase
Igniter Push Button
The igniter push button is OEM quality at a competitive price. Works great making it easy to light my Charbroil Grill. Completely satisfied.
★★★★★
★★★★★
August L - March 31, 2020
Verified Purchase
Good thing I like fixing things
The part did just what it was designed to do and because I was willing to get my hands dirty it works great!
Model Compatibility
This part works with the following models:
Fix Number: FIX12011759
Manufacturer Part Number: G515-0017-W7
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.