9157810-1-M-Briggs and Stratton-91825GS-Brush Holder Assembly
Part Location Diagram of 91825GS Briggs and Stratton Brush Holder Assembly
See part A6 in the diagram
9157810-1-S-Briggs and Stratton-91825GS-Brush Holder Assembly 360 view
( Grid squares measure 1x1 inch )
9157810-1-S-Briggs and Stratton-91825GS-Brush Holder Assembly 9157810-2-S-Briggs and Stratton-91825GS-Brush Holder Assembly 9157810-3-S-Briggs and Stratton-91825GS-Brush Holder Assembly 9157810-1-S-Briggs and Stratton-91825GS-Brush Holder Assembly 360 view
Part Location Diagram of 91825GS Briggs and Stratton Brush Holder Assembly

Brush Holder Assembly 91825GS

$ 62.44
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX9157810
Manufacturer #:
91825GS
Manufactured by:
Briggs and Stratton

Product Description

This is a genuine OEM sourced replacement part designed for use with generators. This assembly includes a plastic brush holder, two (2) carbon brushes with a lead wires and springs attached. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • First remove the cover and gain access to the brush assembly • Take our old brushes and replace them with the new ones • Reassembly the cover

  • Works with the following brands:
    Briggs and Stratton, Craftsman, Snapper, Troy-Bilt
  • Works with the following products:
    Generator
  • Part# 91825GS replaces these:
    91825GS