Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
September 28, 2021
How do I install a new splash guard
For model number GC1000
Hello Lawrence, thank you for your question. First, unplug the unit. Then disconnect the dishwasher inlet port. Using a 3/8 inch nut driver or a flat head screw driver, unthread the mounting screws securing the tailpipe flange to the disposer. Now rotate the lock ring counter clockwise to release the disposer from the sink. If still intact, pull off the old splash guard to install the new splash guard. Align it over the lip on the top of the disposer. Reinstall the disposer by positioning it in the mounting bracket making sure the disposer's outlet port is aligned with the tailpipe. Confirm the tailpipe gasket is in place on the outlet port, then position the tailpipe flange with the port and thread the two screws to secure. Now fully rotate the disposer lock ring clockwise until it locks into place. Reattach the dishwasher drain hose to the inlet port, plug the power cord back in and the garbage disposer should be ready for use. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
This part works with the following models:
Fix Number: FIX357521
Manufacturer Part Number: 4211615