See part 3 in the diagram
( Grid squares measure 1x1 inch )
Splash Guard
$27.73
In Stock
Fix Number: FIX357521
Manufacturer #: 4211615
Manufactured by:
Whirlpool
-
Product Description
This is a flexible rubber cover that is over the top of the sink drain. It keeps liquids and smaller food particles from splashing back into the sink.
-
Works with the following brandsKitchenAid, Whirlpool, Magic Chef, Maytag
-
Works with the following productsFood Waste Disposer
-
Part Number Cross ReferencePart# 4211615 replaces these:AP2933976, 563446, 4211307, 4211615, 4323113, 7-52503, 752503, 83001047, W10834065
Product Description
This is a flexible rubber cover that is over the top of the sink drain. It keeps liquids and smaller food particles from splashing back into the sink.
-
Works with the following brands:KitchenAid, Whirlpool, Magic Chef, Maytag
-
Works with the following products:Food Waste Disposer
-
Part# 4211615 replaces these:AP2933976, 563446, 4211307, 4211615, 4323113, 7-52503 ... Show more , 752503, 83001047, W10834065 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lawrence
September 28, 2021
How do I install a new splash guard
For model number GC1000
Hello Lawrence, thank you for your question. First, unplug the unit. Then disconnect the dishwasher inlet port. Using a 3/8 inch nut driver or a flat head screw driver, unthread the mounting screws securing the tailpipe flange to the disposer. Now rotate the lock ring counter clockwise to release the disposer from the sink. If still intact, pull off the old splash guard to install the new splash guard. Align it over the lip on the top of the disposer. Reinstall the disposer by positioning it in the mounting bracket making sure the disposer's outlet port is aligned with the tailpipe. Confirm the tailpipe gasket is in place on the outlet port, then position the tailpipe flange with the port and thread the two screws to secure. Now fully rotate the disposer lock ring clockwise until it locks into place. Reattach the dishwasher drain hose to the inlet port, plug the power cord back in and the garbage disposer should be ready for use. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX357521
Manufacturer Part Number: 4211615
Manufacturer Part Number: 4211615
Brand
Model Number
Description