9937837-1-M-Ryobi-308038010-Curved Shaft Assembly
Part Location Diagram of 308038010 Ryobi Curved Shaft Assembly
See part C3 in the diagram
9937837-1-S-Ryobi-308038010-Curved Shaft Assembly 360 view
( Grid squares measure 1x1 inch )
9937837-1-S-Ryobi-308038010-Curved Shaft Assembly 9937837-2-S-Ryobi-308038010-Curved Shaft Assembly 9937837-3-S-Ryobi-308038010-Curved Shaft Assembly 9937837-1-S-Ryobi-308038010-Curved Shaft Assembly 360 view
Part Location Diagram of 308038010 Ryobi Curved Shaft Assembly

Curved Shaft Assembly 308038010

$ 18.63
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX9937837
Manufacturer #:
308038010
Manufactured by:
Ryobi

Product Description

This is a Genuine OEM sourced replacement part designed for use with Ryobi String Trimmers and Brushcutters. This item is made out of Metal and it is Sold Individually. It is the Lower Shaft that the Cutting Head is attached to. ? The attachment connects to the power head by means of a coupler device. ? Loosen the knob on the coupler of the power head shaft and remove the end cap from the attachment. ? Push in the button located on the attachment shaft. ? Align the button with the guide recess on the power head coupler and slide the two shafts together. ? Rotate the attachment shaft until the button locks into the positioning hole. NOTE If the button does not release completely in the positioning hole, the shafts are not locked into place. Slightly rotate from side to side until the button is locked into place. ? Tighten the knob securely.

  • Works with the following brands:
    Ryobi
  • Works with the following products:
    Trimmer