9934622-1-M-Honda-28400-Z0L-V20ZB-Starter Assembly.- Recoil R280
Part Location Diagram of 28400-Z0L-V20ZB Honda Starter Assembly.- Recoil R280
See part N-1 in the diagram
( Grid squares measure 1x1 inch )
9934622-1-S-Honda-28400-Z0L-V20ZB-Starter Assembly.- Recoil R280 Part Location Diagram of 28400-Z0L-V20ZB Honda Starter Assembly.- Recoil R280

Starter Assembly.- Recoil R280

Works With Model HRR216K2SDAA!
$ 12.33
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX9934622
Manufacturer #:
28400-Z0L-V20ZB
Manufactured by:
Honda
Works With Model HRR216K2SDAA!

Product Description

This is an authentic recoil starter assembly for a lawnmower. This part consists of the starter rope, rope handle, and red plastic housing that encases it. This assembly is sold as one part (pre-assembled) and is what engages the flywheel when starting the motor. For this simple repair, start by making sure the engine has had time to cool off, the wire and boot have been removed from the spark plug, and the fuel valve is off. Remove the starter rope from the rope guide and then remove the nuts holding the recoil starter to the mounting bolts. This should allow you to pull the worn recoil starter out. To install your new part, hook the new starter rope to the rope guide. Line up the starter onto the mounting bolts and fasten the nuts.

  • Works with the following brands:
    Honda, Jonsered, Craftsman
  • Works with the following products:
    Lawn Mower, Engine