Crank Arm 242302-00
Works With Model 79-034-04!
$6.25
In Stock
- Fix Number:
- FIX9927367
- Manufacturer #:
- 242302-00
- Manufactured by:
- DeWALT
Works With Model 79-034-04!
Jump to:
Product Description
This is a crank arm for a workmate, sold individually. It is also sometimes referred to as a handle arm. The hole that connects the crank to the shaft has a diameter of a 1/2-inch. The purpose of the crank arm is to open and close the front rear vise jaws. To assemble, place the crank arm over the vise screw rod end, line up the holes and secure the roll pin using a hammer.
-
Works with the following brands:Black and Decker, Stanley
-
Works with the following products:Sawhorse, Workbench
-
Part# 242302-00 replaces these:242302-00, P242302-00
- Works with the following brands:
- Black and Decker, Stanley
- Works with the following products
- Sawhorse, Workbench
- Part# 242302-00 replaces these:
- 242302-00, P242302-00
Part Number Cross Reference
Videos For installing this part.
Replacing your Crank Arm
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
A broken crank arm and knob had been replaced by one of dad's "creative" solutions (a pipe fitting & a rusty nail bent at a 90 degree angle). Yikes!
It would have been super easy if I had just had to follow your repair video. However, I had to punch out the metal pin, which went thru dad's make-shift repair (the pipe fitting) It was a bit stubborn. After that, I put the crank arm on & snapped the new knob on. If users follow your repair video, it should be very easy.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX9927367
Manufacturer Part Number: 242302-00
Manufacturer Part Number: 242302-00
| Brand | Model Number | Description |
|---|---|---|
| Black and Decker | 79-028 | Sawhorse - Workmate |
| Black and Decker | 79-032 | Sawhorse - Workmate 200 Work Center |
| Black and Decker | 79-032-46 | Workbench - Workmate 200 |
| Black and Decker | 79-033-BDK | Sawhorse - Workmate 300 Work Center |
| Black and Decker | 79-034 | Sawhorse - Workmate 400 Work Center |
| Black and Decker | 79-034-04 | Workbench - Interco Wm400 - Canada |
| Black and Decker | 79-038-04 | Workbench - I/Co. Wm350 - Canada |
| Black and Decker | 79-038-BDK | Sawhorse - Workmate 350 |
| Black and Decker | 79-041 | Workbench - Workmate 400 |
| Black and Decker | 79-042 | Sawhorse - Workmate 2 |
| Black and Decker | 79-042-04 | Workbench - Canada Wm Plus |
| Black and Decker | 79-131 | Sawhorse - Whc Workmate |
| Black and Decker | 79-228 | Sawhorse - Workmate 150 |
| Black and Decker | 79-228U | Sawhorse - Wkmt.150 Unassembl |
| Black and Decker | MM003 | Sawhorse - Workmate |
| Black and Decker | WM125 | Sawhorse - Workmate |
| Black and Decker | WM225 | Sawhorse - Workmate |
| Black and Decker | WM375 | Sawhorse - Workmate |
| Black and Decker | WM400 | Sawhorse - Workbench |
| Black and Decker | WM425 | Sawhorse - Workmate |
| Black and Decker | WM500 | Sawhorse - Workmate |
| Black and Decker | WM525 | Sawhorse - Workmate |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.