KEY PANEL WB27X10792

Replaced the control panel that had the new rheostat control to set the clock, options, cook time, etc. Only problem was that none of the videos showed how to get to the panel for a free standing microwave. Had to take off the cover which required a security star socket (the ones that have a hole in the center). Be careful not to touch th ... Read more e high voltage capacitor, but otherwise remove one screw from inside the chassis to the from panel, and a bottom outside screw that holds the outside trim down, and push up on the panel to remove. Detach all of the wiring (we took a picture before doing), and remove the panel. The white plastic door release can be taken off before or after removing (it comes out by spreading the black holding brackets (carefully, not too hard so they don't break). We took the panel out first, then removed the door release. It was pretty easy to reinsert it from inside the chassis once the panel was put back in place. The rest is just unscrewing the boards, replacing the control panel, (just pull out the wire strip from the pinned bracket on the main board) re-screwing, and and reinserting the new wiring strip into the pinned connector (easy). replacement part is working great!