Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Electronic Control
$198.28
In Stock
- Fix Number:
- FIX953671
- Manufacturer #:
- WB27K10140
- Manufactured by:
- GE
- Product Description
- When you replace this part, you will have to replace the knob as well, as the original knob will not fit this new control. ***Also, the wiring could be different than the original and will possibly need to be installed by an appliance repair person.
- Works with the following brands:
- Hotpoint, General Electric
- Works with the following products
- Range
- Part# WB27K10140 replaces these:
- AP3792697, 1086146, WB11K0065, WB11K0065R, WB11K65, WB27K10047
Part Number Cross Reference
Product Description
When you replace this part, you will have to replace the knob as well, as the original knob will not fit this new control. ***Also, the wiring could be different than the original and will possibly need to be installed by an appliance repair person.
-
Works with the following brands:Hotpoint, General Electric
-
Works with the following products:Range
-
Part# WB27K10140 replaces these:AP3792697, 1086146, WB11K0065, WB11K0065R, WB11K65, WB27K10047
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- richard from greenwood springs, MS
- Parts Used:
- WB27K10140
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
oven igniter wwould not glow
Replaced controller: Removed for screws from back panel, removed and marked wires,removed thermostat Knob & four screws from control, Peeled off push button pad plate and stuck on new control, then installed control. Double check Neutral and hot wires before applying power.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX953671
Manufacturer Part Number: WB27K10140
Manufacturer Part Number: WB27K10140
Brand
Model Number
Description
✖
Mail-In Recycling Rebate