Decal-Routing, Belt

Hi Max, Thank you for your question. Yes, this would be the correct decal for your zero-turn mower. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hi Will, thank you for contacting us. Unfortunately, we do not have the video with us. We are providing you with some instructions that can help you remove and replace the belt: disconnect the spark plug wires and make sure that the parking brake is set. Lower the mower deck to the lowest cutting position. Remove the left pulley cover on the mower deck. Push in the blade belt idler pulley and roll the blade drive belt off the left blade pulley. Reach under the rear of the mower frame and remove the blade drive belt from the electric clutch. Disconnect the mower deck mounting pins and release the hanging brackets from the mower deck. Push the mower deck slightly forward and release it from the front bracket. Push the mower deck out from under the mower frame. Unplug the electric clutch wiring harness beside the motor. Remove the mounting screws from the flywheel cover and pull the cover off to access the flywheel nut. Hold the flywheel nut stationary and remove the mounting bolt from the clutch. Pull the electric clutch off the engine crankshaft. Lift the driver seat forward and push on the idler pulley bracket while rolling the ground drive belt off the engine pulley. Release the ground drive belt from the transmission pulleys and pull the belt out of the mower. We hope this information is useful!