Part Location Diagram of 791-181531 MTD Spring
See part B17 in the diagram
Replacing your MTD Trimmer Spring
( Grid squares measure 1x1 inch )

Spring 791-181531

$ 2.99
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX9149258
Manufacturer #:
791-181531
Manufactured by:
MTD

Product Description

The metal spring goes between the e-clip and the plunger and helps to maintain tension. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers. This is a small part that will need to be replaced if it becomes lost or stretched and may require a screwdriver to install the spring. This is available as an individual replacement part.