Part Location Diagram of WD28X10103 GE Third Level Spray Arm
See part 570 in the diagram
( Grid squares measure 1x1 inch )

Third Level Spray Arm WD28X10103

Works With Model 40640129!

Rated by 2 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$54.01
In Stock
Fix Number:
FIX755622
Manufacturer #:
WD28X10103
Manufactured by:
GE
Works With Model 40640129!

Product Description

Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack. This spray arm does not come with the screws.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
David from Pensacola, FL
Parts Used:
WD28X10103
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Wrench (Adjustable), Wrench set
3rd spray wash arm would not spin. Had to replace the 3rd spray wash arm.
Disconnected the power, water & drain. Unloosen the brackets that held the dishwasher to underside of counter. Then pulled the washer from about 3/4 quarters of the out from beneath the counter. Pulled back the insulation on top of the washer. Pulled out top dish rack & reach inside held the spray arm with left had while I unloose the 2 small bolt that held it. Installed the new one in reverse order. Slide washer back under counter. Re attached brackets to counter (underneath). Then reconnected the power, water & drain. Tested. Arm does what is supppose to spraying water & cleaning top of dishes in the top rack.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
douglas from Marlboro, NY
Parts Used:
WD28X10103, WD8X228, WD8X227, WD24X214
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Leak from top of tub
Diagnosed leaky upper hose. Ordered part, it arrived the next day! Good job! Detached faulty hose from pump, then from top of tub. I had to replace 1 screw, it was rusted. Replaced with new hose and spray arm. Added some epoxy around the repair, on the exterior of tub. Works great!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX755622
Manufacturer Part Number: WD28X10103
Brand Model Number Description
Kenmore 1858 Dishwasher - Kenmore Dishwasher 18585(1988)
Kenmore 36314382000 Dishwasher
Kenmore 36314387000 Dishwasher
Kenmore 36314389000 Dishwasher
Kenmore 36314482100 Dishwasher
Kenmore 36314484100 Dishwasher
Kenmore 36314487100 Dishwasher
Kenmore 36314489100 Dishwasher
Kenmore 36314572000 Dishwasher
Kenmore 36314573000 Dishwasher
Kenmore 36314577000 Dishwasher
Kenmore 36314579000 Dishwasher
Kenmore 36314582100 Dishwasher
Kenmore 36314584100 Dishwasher
Kenmore 36314587100 Dishwasher
Kenmore 36314589100 Dishwasher
Kenmore 36314672100 Dishwasher
Kenmore 36314673100 Dishwasher
Kenmore 36314674100 Dishwasher
Kenmore 36314679100 Dishwasher
Kenmore 36314772100 Dishwasher
Kenmore 36314773100 Dishwasher
Kenmore 36314774100 Dishwasher
Kenmore 36314779100 Dishwasher
Kenmore 3631479580 Dishwasher
Kenmore 36315212100 Dishwasher
Kenmore 36315219100 Dishwasher
Kenmore 36315222100 Dishwasher
Kenmore 36315229100 Dishwasher
Kenmore 36315272100 Dishwasher